IEC 60811-506
Hot pressure deformation test tools as per IEC 60811-508
IEC 60811-506
Hot pressure deformation test tools as per IEC 60811-508

Hot Pressure Deformation Test Tool as per IEC 60811-508

Availability:

<p class="stock in-stock"></p>
Add to wishlist
Compare

Hot deformation test is also called a hot pressure test is an acceptance test in order to assess high-temperature resistance of the material to deformation. Thermoplastics tend to deform under high temperatures and small damage during movement or under installation to cable, can cause a puncture or cut of insulation. This could result in the circuit break down shutting down the entire system.
According to the famous test institute of Germany, it was said that the most failing test for HO5-HO7V K cables is this test. In order to achieve a high speed of extrusion, manufacturers tend to inadvertently ignore the impact of compound degradation.

Cable and plastic test equipment also consists of small tool apparatus such as cold bend, cold impact, and hot pressure deformation tools.
The tool contains:-

5 steel blades with CNC made edges.

Mandrels for hanging with blades

6 NABL accredited mass pieces from 5 to 35 N as per IEC-60811-508

4 Frames of the blade assembly

One metallic stand as shown in the picture.

Deformation test Auf Deutsch:-

Kabel- und Kunststoffprüfgeräte bestehen auch aus kleinen Werkzeugapparaten wie Kaltbiege-, Kaltschlag- und Heißdruckverformungswerkzeugen.
Das Werkzeug enthält:-

5 Stahlklingen mit CNC-gefertigten Schneiden.

Dorne zum Aufhängen mit Klingen

6 NABL-akkreditierte Massenstücke von 5 bis 35 N nach IEC-60811-508

4 Rahmen der Messerbaugruppe

Ein metallischer Ständer wie auf dem Bild gezeigt.

Deformation test In italiano:-

Le apparecchiature di prova per cavi e plastica consistono anche in piccoli utensili come piegatrici a freddo, utensili di deformazione a freddo e a pressione calda.
Lo strumento contiene:-

5 lame in acciaio con bordi realizzati a CNC.

Mandrini per appendere con le lame

6 pezzi di massa accreditati NABL da 5 a 35 N secondo IEC-60811-508

4 Telai del gruppo lame

Un supporto metallico come mostrato in figura.

Deformation test En français:-

L’équipement d’essai des câbles et des plastiques se compose également de petits outils tels que les outils de pliage à froid, d’impact à froid et de déformation sous pression à chaud.
L’outil contient : –

5 lames d’acier avec des bords fabriqués par CNC.

Mandrins à suspendre avec les lames

6 pièces de masse accréditées NABL de 5 à 35 N selon CEI-60811-508

4 Cadres de l’ensemble de la lame

Un support métallique comme indiqué sur la photo.

Deformation test En español:-

Los equipos de prueba de cables y plásticos también consisten en pequeños aparatos de herramientas como herramientas de doblado en frío, impacto en frío y deformación de presión en caliente.
La herramienta contiene:-

5 cuchillas de acero con bordes hechos con CNC.

Mandriles para colgar con cuchillas

6 piezas de masa acreditadas por la NABL de 5 a 35 N según IEC-60811-508

4 Marcos del conjunto de la cuchilla

Un soporte metálico como se muestra en la foto.

 

Hot Deformation Test Tool as per IEC 60811-508

 

You can also check our more Machinery Products.

SKU: N/A Category: Tags: , , ,

Related products