Copper Purity Test Apparatus
<p class="stock in-stock"></p>
Copper Purity Test Apparatus is used to test the purity or percentage of Copper in a sample. The test itself is very important when it comes to determining conductor resistivity and conductivity. Many cases had have been seen when a micron of CU more has costed companies in millions for years. And many companies are though working upon copper optimization projects still they miss the lass mile of fine-tuning the process and product and 6 sigma level. All because the CU is not as pure as you are considering in your theoretical calculations. For more support you might get in touch with us on the topic, we provide free consultation on CU optimization projects.
Copper Purity test equipment uses a chemical electrolysis method to determine the purity % of CU. The results show the content of CU in the specimen. It does not determine a detailed analysis report of impurities as X-ray refractometry but gives the accurate idea of purity only.
The working principle consists of CU specimen dissolved into a specific solvent (we can provide that too) and then charged Cathode and anode made of platinum and iridium are used to abstract and determine the content of real CU. the instrument consists of:-
- Anode and Cathode created with Platinum, Irridium blend
- Controlled heating plate-PID
- Current monitor-Digital
- voltage and current source with the stirrer
- Magnetic heater mechanism
- Digital temperature setting-PID
- Digital timer
- Laboratory glassware
Related products
-
Automated Testing, General & Physical Tests, Machinery
UV weathering test chamber as per ISO 4892 – XENON ARC
Automated Testing, General & Physical Tests, MachineryUV weathering test chamber as per ISO 4892 – XENON ARC
UV weathering test chamber as per ISO 4892-XENON ARC TEST EQUIPMENT generally compliant with HD 626-2 or ISO 4892-2
The test equipment consists of
- 1-piece water-cooled xenon lamp with inner quartz and outer borosilicate filter
- Programmable color display touch screen controller to control and display test parameters
- Measurement and control of irradiance value at both 340nm, and 300~400nm
- Measurement and control of Black Panel Temperature (BPT)
- Measurement and control of chamber temperature and chamber humidity
- A water spray system with a built-in 50L water reservoir
- An automatic water supply system
- Industrial control panel with ferrule numbering & professional wiring for easy maintenance and troubleshooting
- RS-232 interface, able to connect and programs with Industrial PC/Desktop PC/Laptop
please also check our Fluoroscent Lamp UV weathering test equipment for cost-effective version.
Xenon Arc Test or UV Weathering Test as per ISO 4892-2 & 3
SKU: n/a -
General & Physical Tests
Cold Bend Test | Cold Impact Test
IEC 60811-504 describes the cold bend test method for cables under low temperatures. The cold bend test on cable is only possible upto a maximum diameter of 12.5mm. The test is mainly conclusive to understand the flexibility and strength of plastic used over cable under low temperatures.
Whereas cold impact test on cables is performed according to IEC 60811-506. This test is mainly designed to simulate the plastic’s capacity to resist mechanical shock under cold environment.Here from a certain height, mandrels of specific weight are dropped on the cable.
SKU: n/a -
General & Physical Tests
Shore A and D – Hardness Tester
The hardness tester is used for understanding the suitability of plastic compound material such as PVC, LSZH, EVA, PE, etc.
The test itself becomes very important when it is crucial to decide the temperature profile and tensile strength required for the product in the design phase. The hardness of the compound also determines flexibility of cable up to some extent.
SKU: n/a -
General & Physical Tests
Vertical Cold Chamber upto -86 deg
Cold chambers are and integral part of any cable test laboratory. They are helpful in performing cold bending, cold elongation and cold impart tests as per latest revision of IEC-60811 5 and 6 series. Techtrivial has many different designs and sizes for vertical cold chambers ranging from -15 degree Celsius to -86 degree Celsius.
SKU: n/a
