Constant Temperature Water Bath
<p class="stock in-stock"></p>
(Correct Heading: 300L Constant Temperature Water Bath)
300L Constant Temperature Water Bath used for the test of insulation resistance and withstand voltage of electric wires in water. It is in line with IEC60811-1-3 and UL1581-2006.
Specifications:-
Customized support: OEM, ODM
Temperature stability:-< 1.5℃
Standard:-IEC60811
Warranty:-1 Year
Temperature control range:-0 ~ 98 ℃
Electric heating power:-1600 W
Inner dimension:-L400 * W500 * H500 mm
Input voltage:-220V / 50Hz
Power:-Electronic
Material:-SUS 304 Stainless Steel
Model Number:-D427
Outer dimension:-L750 * W550 * H650 mm
Product Description
IEC60811 100L Constant Temperature Water Bath
Application:-
This water tank is withstood voltage of resistance and water electric wires is used for the test of insulation, and it is a resistance tester and used together with insulation to withstand the voltage test.
Standards:-
Meets IEC60811-1-3,UL1581-2006 standards
| Parameters:- | |
| Inner dimension | L400 * W500 * H500 mm |
| Outer dimension | L750 * W550 * H650 mm |
| Temperature control range | 0 ~ 98℃ |
| Temperature stability | < 1.5℃ |
| Electric heating power | 1600 W |
| Input voltage | 220V / 50Hz |
| Material | Electrostatic paint outside, stainless steel inside |
| The above dimensions are only for example | Can be customized according to customer requirements |
Frequently Asked Questions:-
What is IEC 60811 100L?
It describes general that are together given in specified general of IEC 60811-100 the particular matters that apply to all the requirements and considerations test methods. This first edition parts, unless otherwise collects the restructured IEC 60811 series.
What is the constant temperature of the water in the baths?
Economical constant superior temperature can be fluids high as 100°C controlled at temperatures temperature water baths offer as control, range, and uniformity.
Related products
-
Electrical & Electronic
ISO 5659 Plastic Smoke Density Measuring Instrument
Plastic Smoke Density Measuring Instrument Smoke Density Tester is suitable for measuring the specific optical density of the smoke produced during the combustion of plastics. It is in line with standard GB/T8323.2-2008 “Plastic Smoke Generation-Part 2: Test Method for Measuring Smoke Density by Single Chamber Method”.
SKU: n/a -
-
Electrical & Electronic
IEC60754 Intelligent Halogen Acid Gas Release Determination Test
Intelligent Halogen Acid Gas Release Determination Test Device is used to determine the total halogen acid gas of low halogen and halogen-free flame retardant cable and to measure the acidity of the gas by measuring the PH value and conductivity. It in line with IEC60754 standard.
SKU: n/a -
Electrical & Electronic
Building Material and Structure Surface Flame Spread Tester
Building Material and Structure Surface Flame Spread Tester is Applicable to the determination of the propagation of flame along the surface of a vertical plate specimen the results of which are suitable for comparing the fire performance of exposed surfaces of walls or ceilings.
SKU: n/a
