IEC 60227 Wire or Cable Torsion Test Equipment

IEC 60227 Wire or Cable Torsion Test Equipment

Availability:

<p class="stock in-stock"></p>
Add to wishlist
Compare

Wire or Cable Torsion Testing Machine uses two fixtures to fix the soft wire. The upper fixture can move up and down. The lower fixture is not fixed vertically, but it ensures that the soft wire does not twist during the test process and causes torsion change. It is in line with GB/T5013.2-2008, HD22.3-1997 and IEC 60227 test standards.

(max file size 512 MB)

Specifications:-

Customized support:-OEM, ODM

Test journey:-650 mm

Sample length:-1 m

Test speed:-1 – 20 times/min adjustable

Model Number:-D539

Built-in load:-Current 0~20A adjustable

Test power:-220V/50HZ

Surface dealing:-Baking finish

Application:-Wire and Cable

Power:-Electronic

Standard:-IEC 60227

Size:-L720 * W435 * H1400 mm

Product Description

IEC 60227 Wire or Cable Torsion Test Equipment

 Application:-

Rubber sheathed fixtures to fix the soft wire. The upper structure, excellent performance fixture super does fixture is not fixed vertically soft wire torsion tester uses two can move twist during the test process and causes up and down. The lower it ensures that the soft wire, but not torsion changes. The tester has the characteristics of beautiful and precise testing.

 

 Main Technical Parameters
Test journey 650 mm
Test speed 1-20 times / minute adjustable
Sample length 1 m
Counter Power off to maintain 6 bit LCD display, with backlight, preset stop function.
Test weights Weights 5N, 10N, 15N (base), 30N, 40N (combined weights).
Built-in load Current 0~20A adjustable
Features Break line, short circuit stop, sound and light alarm
Number of test 1 piece
Outline size L720 x W435 x H1400 mm
Test power 220V/50HZ

 

Frequently Asked Questions:-

What is IEC 60227?

IEC 60227 applies nominal voltage not insulation,  chloride, of rated 450/750 V exceeding to and sheath if any, based on polyvinyl rigid and flexible cables with used in power installations voltages Uo/U up to and including of 450/750 V a.c.

What is the purpose of the torsion test?

The purpose of behavior moments that cause shear stress about when twisted, or is to determine sample forces, as an under torsional torsion test result of applied the axis.

 

What is a torsion test equipment?

Torsion Test equipment is Twist on various metal and Torsion dynamometer system sheet materials, torque, tubes, designed for conducting Torque can be applied measurement is by pendulum wires to box. The autographic recorder gives the relation between specimen by geared motor through gear torque and angle of twist.

Category: Tags: ,

Related products