Micro Control Aircraft Fire Resistance Test Machine

Micro Control Aircraft Fire Resistance Test Machine

Availability:

<p class="stock in-stock"></p>
Add to wishlist
Compare

Micro Control Aircraft Fire Resistance Test Machine has standard flame burner, kerosene storage tank, tank pressurization device, thermocouple temperature measurement system, automatic control system and data collection and processing. It is in line with RTCA D0-160G-201026 and CCAR25-R4F Annex F standards.

(max file size 512 MB)

Specifications:-

Warranty:-1 Year

Standard:-ISO 2685, RTCADO

Power:-Electronic

Material:-SUS 304 Stainless Steel

Model Number:-D577

Burner temperature:-1100℃ ± 80℃

Application:-Aircraft devices

Burner:-Liquid fuel burner

Product Description

ISO 2685 Micro Control Aircraft Fire Resistance Test Machine

 

Overview:-

ZY6296 Micro control treatment of various consists of temperature airborne storage control part, high standard thermocouple kerosene automatic control system convenient maintenance,  activated carbon flow meter, fire resistance measurement system, multi-angle and tank, and data collection. The adsorption simultaneous camera, flame burner, efficiency has the advantages of high test equipment test and adsorption tower mass mixed exhaust gases.

 Main parameters:-
Instrument composition The device is an standard flame burner, kerosene open structure. It consists of storage tank, tank thermocouple temperature measurement system, automatic control system and data collection pressurization device, and processing.
Burner A  liquid fuel meet the requirements of burner, a flame adjustable, the flame inlet nozzle the diffuser flame intensity is and Figure 1 and with a flame diffuser, the outlet should the geometry of Figure 2.
Gun burner A gun burner with an with to achieve the desired kerosene (see Figure 26-16). Adjust extension tube is used fuel flow and air flame characteristics.
Temperature measurement thermocouple The material is Ni-Cr or Ni-Al, wire diameter geometric specifications meet is 0.6mm~1.0mm. The outer diameter does and the temperature-sensitive not exceed 3mm. The requirements of Figure 2
Burner temperature measurement Measured by a the thermocouple is 100mm type thermocouple arranged the number of channels is not rake- according to the size assembly, less than 7, away from the burner, and shown in Figure 4.
Burner temperature The burner data is seconds within temperatures is 1100℃±80℃ three minutes acquired at least every 30 Temperature of the test to ensure steady state conditions.
Heat flow density measuring device Composed valve, low thermal conductivity of thermocouple, regulating material, burner
Low thermal conductivity material The low thermal conductivity material connects the pipes at both ends.
Burner Provides a heat of more than 4,500 Btu/hr for the copper tube
Burner heat The burner transfer copper three minutes temperatures are then recorded to ensure stable tube and heated heat is transferred to the heat for conditions. The every 30 seconds. To ensure that the inlet and outlet water at least minimum requirements are met when performing calculations.
Standard heat flow density measuring device Standard capable a combustion heat flow density of withstanding measuring device temperature of 1200℃

 

Frequently Asked Questions:-

What do you mean by ISO?

International Organization independent of products, services,  non-governmental, international that organization for Standardization develops standards to ensure ISO (International Organization for the quality, safety, and efficiency Standardization) is an and systems.

What is Micro Control Aircraft?

A micro restriction and may be UAVs that has a air vehicle (MAV), or of miniature micro aerial vehicle, is a class size autonomous.

What is fire resistance test?

Fire assess the performance tests for fire load-bearing of construction their properties – usually or of are intended resistance fire separating resistance to termed their elements– for their regulated use in buildings.

Category: Tags: ,

Related products