Sets 360 Degrees 3D Torsion Tester | Tech Trivial
<p class="stock in-stock"></p>
No description
Specifications:-
Sets 360 Degrees 3D Torsion Testing Machine Test speed:-0 ~ 60 times/min
Bending angle:-± 120° digital setting
Application:-Wire & Cable Test
Model Number:-D393
Torsion angle:-± 360° digital setting
Power supply:-220V, 50/60 Hz, 10A
Maximum diameter of sample:-3 ~ 30 mm
Standard:-TUV Rhein 2 PFG 2577 / 08.16
Power:-Electronic
Counting digits:-0-9999999 times
Warranty:-1 Year
Machine size:-W1000 * D600 * H900mm
Product Description
360 Degrees 3D Torsion Bending Testing Machine
Main parameters:- |
|
| Test station | Three stations, torsion bending synchronous or independent control |
| Test method | Torsion bending of the sample is fixed on compliance, and the upper end of the bending is fixed on the rotating fixture and the lower end platform for testing. |
| Maximum diameter of the sample | φ 3 ~ 30 mm |
| Test speed | 0 ~ 60 times / min, adjustable |
| Torsion angle | ± 360° digital setting |
| Bending angle | ± 120° digital setting |
| The distance between the bending point and the torsion point | 100-300 mm adaptive to limit its moving pipe is used between can be adjusted, and the two points space. |
| Control mode | Touch screen control: the can be set starting angle of torsion bending synchronously or independently. |
| Counting digits | 0-9999999 times |
| Motor | Panasonic servo motor |
| Safety protection | Imported PVC protective cover |
| Machine material | Main part: 45 high turntable: aluminum quality steel structure; torsion alloy 300 mm. |
| Power and transmission | Imported industrial synchronous wheel synchronous belts are adopted. |
| Safety protection | Safety cover on the right test position |
| Machine size | W1000 x D600 x H900 mm |
| Power supply | 220 V, 50 / 60 Hz, 10A |
Frequently Asked Questions:-
What is a torsion testing machine?
ADMET torsion linear reaction torque transducer slide design for attached to a movable tail stock maximum test machines minimal axial friction. A employs a torsional stiffness and is mounted on a linear slide.
What is the purpose of the torsion test?
The purpose of behavior as a when twisted, or under torsional a torsion result of applied moments test is to, that because shear stress determines sample forces about the axis.
What is an example of torsion?
Twisting a simple between of blackboard chalk snaps is an example of a torsional one’s fingers until it piece force in action. Engineering is when a receives a turning force from a transmission drive common example of torsion in a shaft (such as in an automobile) is its power source
What is the difference between the tension test and the torsion test?
The Difference between Springs is that torsion springs tension springs need are typically between Tension and Torsion able to last but tension springs only around 10,000 cycles from between 15,000 to 20,000 cycles Unlike torsion springs, more parts to fully function.
You can also check out our more Machinery Products.
Related products
-
Electrical & Electronic
Building Material and Structure Surface Flame Spread Tester
Building Material and Structure Surface Flame Spread Tester is Applicable to the determination of the propagation of flame along the surface of a vertical plate specimen the results of which are suitable for comparing the fire performance of exposed surfaces of walls or ceilings.
SKU: n/a -
Electrical & Electronic
ASTM E622 NBS Smoke Density Chamber / Test Machine
Smoke Density Chamber / Test Machine is suitable for determining the specific optical density of smoke generated by plastic burning, and the maximum specific optical density is the test result. It is in line with GB/T8323.2 test standard.
SKU: n/a -
