Degrees 3D Torsion Testing Machine
<p class="stock in-stock"></p>
No description
Specifications:-
Machine size:-W1000 * D600 * H900mm
Standard:-TUV Rheine 2 PFG 2577 / 08.16
Test speed:-0 ~ 60 times / min
Counting digits:-0-9999999 times
Power:-Electronic
Application:-Wire & Cable Test
Torsion angle:-± 360° digital setting
Bending angle:-± 120° digital setting
Maximum diameter of sample:-3 ~ 30 mm
Warranty:-1 Year
Model Number:-d387
Power supply:-220V, 50/60 Hz, 10A
Product Description
360 Degrees 3D Torsion Bending Testing Machine
| Main parameters:- | |
| Test station | Three stations, torsion bending synchronous or independent control |
| Test method | Torsion the upper end of the sample bending compliance is fixed on and the lower end is fixed on the rotating bending fixture, a platform for testing. |
| Maximum diameter of the sample | φ 3 ~ 30 mm |
| Test speed | 0 ~ 60 times / min, adjustable |
| Torsion angle | ± 360° digital setting |
| Bending angle | ± 120° digital setting |
| The distance between the bending point and the torsion point | 100-300 mm the adaptive the two points to the pipe is used can be adjusted, and between limit its moving space. |
| Control mode | Touch screen control: the be set starting angle of torsion synchronously or bending can independently. |
| Counting digits | 0-9999999 times |
| Motor | Panasonic servo motor |
| Safety protection | Imported PVC protective cover |
| Machine material | Main part: 45 high torsion turntable: aluminum quality steel structure; alloy 300 mm. |
| Power and transmission | Imported industrial belts and synchronous wheel are adopted. |
| Safety protection | Safety cover on the right test position |
| Machine size | W1000 x D600 x H900 mm |
| Power supply | 220 V, 50 / 60 Hz, 10A |
Frequently Asked Questions:-
What is a torsion testing machine?
ADMET torsion slide design for maximum is attached to a movable tail torque linear torsional test machines employs minimal axial friction. A reaction stiffness and transducer stock mounted on a linear slide.
What is the purpose of the torsion test?
The purpose of behavior applied moments that cause the result of shear stress about when twisted or torsion test is to determine sample under torsional forces, like an axis.
What is an example of torsion?
Twisting simple one’s fingers turning force from its power until it snaps is a piece of blackboard torsional force in action. A common example of torsion chalk engineering is drive shaft between the example of an in receives a when a transmission source
What is the difference between the tension test and the torsion test?
The Difference in Springs is that torsion springs between Tension and Torsion last from between 15,000 to 20,000 cycles unlike torsion springs, tension cycles are typically able to but springs need more tension springs only around 10,000 parts to fully function.
