MT818 Coal Mine Cable Flammability Tester
<p class="stock in-stock"></p>
No description
D358 | MT818 Coal Mine Cable Flammability Tester
Specifications:-
Dimension:-L2080 * W600 * H1950 mm
Burning time range:-0~99.99 s/m/h
Standard:-MT386-1995, MT818-2009
Model Number:-D358
Load current:-10 ~ 3000A adjustable
Test Material:-Coal Mine Cable
Sample specification:-L > 1800 mm
Material:-SUS 304 Stainless Steel
Angle of the burner:-Vertical 90 degrees
Combustion chamber:-L1100 * W495 * H910 mm
Input voltage:-AC 220V, 50Hz
Product Description:-
Application:-
Coal mine cable flame and manufactured according to retardant tester is designed to the corresponding coal industry standard. It is suitable requirements of MT386-1995 for the flame retardant cable and flame test of MT818-2009 coal mine retardant cable joint.
Main Technical Parameters:-
Input voltage: AC 220V, 50Hz
The outline size, and the material is SUS304# is L2080 * W600 * H1950 mm stainless steel plate.
The size, the volume is more than 0.5 m3, and of the combustion is SUS304# stainless steel chamber is L1100 * W495 * H910 mm the material plate.
Load current: 10 ~ 3000A continuously adjustable.
The angle of the burner: vertical 90 degrees.
Temperature control table and K thermocouple intelligent PID match measurement system. Its readings range from 0 to 999.9℃.
Burning time range: 0~99.99 s/m/h
Time of combustion duration: 0~99.99 s/m/h
Standard sample specification: L > 1800mm
Frequently Asked Questions:-
What is a flammability test?
Flammability materials ignite, how quickly they burn test methods measure how easily and how they react when burned. In tests observe if the material continues contrast, horizontal flammability to burn after the calculate the rate at which the test flame is removed, and then specimen burns.
What is a flammability test for fabrics?
Flammability a material or finished product wills testing or burn when exposed to or used near fire or determines how easily ignite heat.
What causes flammability?
The degree of depends largely upon the volatility of the material – this is flammability or combustibility in air related to its, which is temperature-dependent. The quantity composition-specific vapor pressure of vapor produced can the surface area of the material be enhanced by increasing forming a mist or dust.
D358 | MT818 Coal Mine Cable Flammability Tester
You can also check out our more Machinery Products.
Related products
-
Electrical & Electronic
IEC61034 Wire and Cable Smoke Density Test Chamber
Wire and Cable Smoke Density Test Chamber is used for determination of smoke density of cables and optical cables burning under specific conditions. It is designed and manufactured according to GB/T17651.1-2-1998 standard.
SKU: n/a -
Electrical & Electronic
ISO 5659 Plastic Smoke Density Measuring Instrument
Plastic Smoke Density Measuring Instrument Smoke Density Tester is suitable for measuring the specific optical density of the smoke produced during the combustion of plastics. It is in line with standard GB/T8323.2-2008 “Plastic Smoke Generation-Part 2: Test Method for Measuring Smoke Density by Single Chamber Method”.
SKU: n/a -
Electrical & Electronic
Continuity Voltage Tester
In Cable manufacturing at the final stage of testing, Continuity test is a standard practice and should be carried on each conductor. It is better to conduct Continuity test before HV test so that further damage of cable can be avoided in case the continuity is not shown by the conductor cores.
SKU: n/a
