D338 Foam Plastic Horizontal Combustion Chamber

D338 Foam Plastic Horizontal Combustion Chamber

Specifications:-

Model Number:-D338

Power:-Electronic

Relative humidity:-≤ 75%

Dimension:-L1130 x W630 x H1305 mm

Standard:-ISO845-1985

Nozzle inner diameter:-0.375 inches (9.5mm)

Test Material:-Foamed plastics

Material:-SUS 304 Stainless Steel

Flame height:-Blue flame of 38 mm

Ambient temperature:-~40℃ at room temperature

Power supply:-AC220V±10V, 50HZ

Main Technical Parameters

Self-made blower, fully comply with the ISO10093.1998 standard.

The specifications of the fire nozzle: inner cylinder 9.5 mm, without length 100 mm diameter cylinder body tail devices

Flare wing top: Wing head opening length 48 mm, internal width 1.3 mm

Flame height: blue flame of 38 mm height.

Sample mesh: 0.8mm 215 mm, width 75 mm, height 13 mm, beside the installation stainless steel wire, mesh length of a 300 mm steel ruler, mesh length 6.4 mm on each side, the minimum scale is 1.0 mm.

Bracket: It is composed of two iron which can be adjusted to the frames with fixture desired angle and height. The sample the bottom of the bracket is 175 mm above chamber

Timer: 0 ~ 99.99s, the accuracy can be set arbitrarily ≤ 1s.

Measure. The minimum scale is 1.0 mm the blue flame scale in combustion.

Gas source: natural value of 37 mJ/m3 gas with a calorific

Standard sample size: long 150 mm, wide 50 mm, 5 < thickness ≤ 13 mm

Outline size: L1130 x W630 x H1305 mm

Installation environment

(1)Ambient temperature: ~40℃ at room temperature.

(2) Relative humidity: ≤ 75%

(3) Supply voltage: AC220V±10V, 50HZ

Frequently Asked Questions:-

What is ISO 845?

It specifies a method for determining and of the apparent overall density cellular the apparent core density plastics and rubbers. If the moulding/extrusion, the apparent material to be formed during overall density or the apparent density, or both, can be tested includes skins core determined.

Is foam plastic recyclable?

Polystyrene so we are not able to packing peanuts in the trash, accept it for recycling at this time. Before discarding items like foam plastic is not recyclable, foam  consider taking them to your local mail and packaging store for reuse, typically without charge.

Is foam plastic or rubber?

Foam rubber manufactured with a foaming agent refers to rubber that has been to create an air-filled matrix structure. Commercial made of synthetic rubber, natural latex or foam rubbers are generally polyurethane.

 

D338 | ISO 845 Foam Plastic Horizontal Combustion Chamber