D323 Bomb Calorimeter Testing Equipment For Building
<p class="stock in-stock"></p>
Bomb Calorimeter Testing Equipment For Building Materials is used for combustion calorific value of building materials is tested. Including the total calorific value and net calorific value of combustion.
It is in line with GB/T14402 – 2007 and ISO1716 – 2002.
D323 Bomb Calorimeter Testing Equipment For Building
Specifications:-
Warranty:-1 year, 1 Year
Certification:-CSA, pock, Reach, IECEE, sock, UL, EPA, GS
Power supply:-220V 50Hz
Calorific Value of Combustion:-0.01 MJ/kg ~ 30 MJ/kg
Model Number:-D323
Customized support:-OEM, ODM
Flame height:-20 ± 2 MM
Material:-SUS 304 Stainless Steel
Power:-Electronic
Application:-Building Materials
Temperature Control Range:-25 ~ 35 ℃
Standard:-ISO 1716
Combustion Chamber:-L700 * W400 * H810 MM
| Technical parameters | |
| Total calorific value of combustion | 0.26 MJ/kg ~ 40 MJ/kg |
| Repeatability error of combustion calorific value | Dynamic ≤ 0.1% |
| Temperature probe test range | 0℃ ~ 40℃ |
| Temperature resolution | 0.0001℃, using semiconductor sensor |
| Oxygen bomb volume | 300 ml, mass: 3.2 kg |
| Inner cylinder volume | 2200 ml |
| No air leakage | When the oxygen charging pressure of oxygen bomb is 0 ~ 3.5Mpa |
| Endurance of oxygen bomb | ≥ 21 MPs water pressure |
| Mixing power | 3W |
| Mixing speed | 375 r/min |
| Ignition circuit | The voltage is 12V and the diameter of the ignition wire is 0.1mm copper wire |
| The thickness of the shell | Greater than 1/10 of the inner diameter of the barrel |
| The inner wall of the barrel | SUS304 stainless steel, which can withstand the corrosion of combustion products of the sample, as well as the pitting corrosion and intergranular corrosion caused by the acid substances produced by combustion |
| Outer cylinder of the calorimeter | Double-layer container with an insulating cover. The inner and outer walls of the calorimeter are filled with insulating materials. The outer cylinder is filled with water. There is a gap of 10 mm between the inner wall of the outer wall and the surrounding of the calorimeter. The shell is supported by three points with the smallest contact area. |
| Inner cylinder of the calorimeter | It is a polished metal container used to contain an oxygen bomb, which can make an oxygen bomb completely invade water. Inner cylinder automatic water injection device, if there is a lack of test water, the equipment will automatically supplement. |
| Pressure gauge and needle valve | Installed on the oxygen supply circuit to display the pressure of oxygen bomb during oxygen charging, accurate to 0.1MPa |
| Method | Crucible method (or cigarette method can also be used) |
| Working power supply | AC220 V, 50 Hz |
| Total power | 150W |
| Equipment dimension | L530mm x W570mm x H984mm |
Frequently Asked Questions:-
What is ISO 1716 Bomb Calorimeter Testing Equipment For Building?
The FTT EN ISO 1716 Bomb high-resolution isoperibolic Calorimeter is an affordable temperature regulated with the embedded control computer. The bomb calorimeter oxygen bomb calorimeter is the most the heat of combustion or calorific common device for measuring the value of a material.
What is the function of a bomb calorimeter?
The Bomb the gross calorific value of or measures the solid and liquid Calorimeter was used to measure samples. It is a that measures the heat of a particular constant-volume type calorimeter reaction calorific value of the fuels.
D323 Bomb Calorimeter Testing Equipment For Building
Related products
-
Electrical & Electronic
IEC60754 Intelligent Halogen Acid Gas Release Determination Test
Intelligent Halogen Acid Gas Release Determination Test Device is used to determine the total halogen acid gas of low halogen and halogen-free flame retardant cable and to measure the acidity of the gas by measuring the PH value and conductivity. It in line with IEC60754 standard.
SKU: n/a -
