Flame Retardant Tester For Face Medical Mask
<p class="stock in-stock"></p>
No description
Specifications:-
(Flame Retardant Tester For Face Medical Mask)
Model Number:-D290
Power supply:-220V 50Hz
Power:-Electronic
Warranty:-1 Year
Velocity of automatic motion :-(60 ± 5) mm / s
Application:-Face Mask
Continuous burning time:-0 ~ 99.99s/m
Flame temperature 🙁 800 ± 50) ℃
Flame height:-40 ± 4 MM
Adjustment range of burner height:-30 mm
Dimension:-W60 x H140 x D35 cm
Weight:-About 30 KG
Technical parameters (Flame Retardant Tester For Face Medical Mask) |
|
| Metal human head mold | Made of metal materials, which can fully simulate the actual use state of the mask. |
| The linear velocity of automatic motion of the head mold | (60 ± 5) mm / s |
| Flame height can be adjusted by | 40 ± 4 mm |
| Temperature detection | Equipped with flame temperature measurement and detection thermocouple |
| Flame temperature | (800 ± 50) ℃ at the height of (20 ± 2) mm from the top of the burner |
| Distance between the top of the burner and the lowest point of mask | (20 ± 2) mm |
| The adjustment range of burner height | 30 mm |
| Wall thickness of the metal head mold | 2-3 mm, which is flame resistant and combustion resistant |
| Continuous burning time and smoldering time timer | 0 ~ 99.99s/m, accuracy: ± 0.1s |
| Working power supply | AC220 V, 50 Hz, 50 W |
| Occupied space | 60cm in width, 140cm in height and 35cm in depth |
| Weight | About 30kg |
Frequently Asked Questions:-
What is Flame Retardant Tester For Face Medical Mask?
Face masks flame retardant tester is to determine the fire resistance performance of face masks and full-face masks. The tester can provide a specific flame and make the dummy head with a facepiece move to the flame at a specific speed. The operator can observe the effects of the flame on the masks and facepiece.
How do you test if your mask is real?
Another quick test you can do with your mask is the water test, by pouring a good amount of water onto the inner side of the mask A genuine surgical mask will hold the water and won’t leak, unlike a fake mask (above, right), which looks flimsy when carrying a small amount of water and may not hold the water in.
Related products
-
-
Electrical & Electronic
ISO 5659 Plastic Smoke Density Measuring Instrument
Plastic Smoke Density Measuring Instrument Smoke Density Tester is suitable for measuring the specific optical density of the smoke produced during the combustion of plastics. It is in line with standard GB/T8323.2-2008 “Plastic Smoke Generation-Part 2: Test Method for Measuring Smoke Density by Single Chamber Method”.
SKU: n/a
