Fire Resistant Coating Flammability Tester
<p class="stock in-stock"></p>
No description
Specifications:-
Material:-SUS 304 Stainless Steel
Warranty:-1 Year
Model Number:-D250
Power:-Electronic, AC220 (±10%) V/50HZ
Sample size:-L900 * W900 mm
Standard:-ASTM E84
Application:-Coatings
Test station:-1 station
Temperature uniformity:-±2.5℃
Air blower air volume 🙁 1 ~ 5) m3/min
| Main technical parameters | |
| Test station | 1 station |
| Temperature uniformity | ±2.5 ℃ |
| Sample size | L900mm x W900mm, thickness of 5mm, the surface is smooth and glossy. |
| Burner | It is made up of two copper bushings with inner diameter of 42mm, wall thickness of 3mm, height of 42mm and inner diameter of 28mm, wall thickness of 3mm and height of 25mm. It is installed on the straight-through pipe joint with nominal diameter of 40mm*32mm. The distance from the burner port to the test piece is 730 mm±6 mm. |
| Thermocouple | Temperature monitoring using thermocouples with accuracy not lower than Grade II, K index. Among them, for flame temperature monitoring, an armored thermocouple with an outer diameter of not more than 3 mm is used; for the back surface of the test piece, the thermocouple with a wire diameter of not more than 0.5 mm is used, and the hot contact should be welded to a diameter of 12mm. The center position of the copper piece of 0.2mm. |
| Automatic alarm | The sample backfire surface five-way thermocouple temperature measurement, it alarms when the temperature automatically reaches 220℃. |
| Gas source | Liquefied petroleum gas or natural gas (user-supplied). |
| Air blower air volume | (1 ~ 5) m3/min |
| Power supply | AC220 (±10%) V/50HZ, total power is 1KW |
Frequently Asked Questions:-
What is the ASTM E84 test?
ASTM E84 also referred to as “E84”, is the standard test method used to assess the surface burning characteristics of a fire protection coatings material used for interior wall and ceiling finishes, with results measured by Flame Spread Index (SFI) and Smoke Developed Index (SDI)
What is a flammability test?
Flammability testing determines how easily a fire protection coatings material or finished product will ignite or burn when exposed to or used near fire or heat.
