Cable Abrasion Test
<p class="stock in-stock"></p>
This is Cable Abrasion Test which is used to check the abrasive resistance of sample. Vertical force is applied on the cable by specified test.
Specification Compliance:
- IEC 60229
- BS 6724
- BS 7846
- Model Number:-D210
In the middle part of the sample, Angular Wedge Assembly as specified in the standard place a length of low carbon steel angle horizontally, at right angles to the cable with its angle edge resting on the cable and its arm symmetrical about the vertical plane.
It has Vertical force is applied the overall diameter of the cable
It has a Counter Meter to measure the number of passes
Digital Timer Set of weights as per standard requirement
Frequently asked questions:-
What is abrasion testing?
It has The intent of abrasion testing is product data that will reproducibly rank materials in their resistance to scratching abrasion under has specified set of conditions. Abrasion testing is used to test witch the abrasive resistance of solid materials.
Why abrasion test is done?
It has Abrasion test is carried out to test the hardness property which aggregates. The principle of the Los Angeles abrasion test is to find the percentage wear due and relative rubbing action between and aggregate and steel balls used as abrasive charges.
Related products
-
Electrical & Electronic
Continuity Voltage Tester
In Cable manufacturing at the final stage of testing, Continuity test is a standard practice and should be carried on each conductor. It is better to conduct Continuity test before HV test so that further damage of cable can be avoided in case the continuity is not shown by the conductor cores.
SKU: n/a -
Electrical & Electronic
ISO 5659 Plastic Smoke Density Measuring Instrument
Plastic Smoke Density Measuring Instrument Smoke Density Tester is suitable for measuring the specific optical density of the smoke produced during the combustion of plastics. It is in line with standard GB/T8323.2-2008 “Plastic Smoke Generation-Part 2: Test Method for Measuring Smoke Density by Single Chamber Method”.
SKU: n/a -
Electrical & Electronic
Cable Fault Pre-Locator
This tester combines both pulse reflecting technology (TDR) & intelligent Bridge testing (Bridge) for measuring the exact fault location such as broken line, cross faults, earthing, poor insulation & poor contact of the lead covered cables also as plastic cables. Cable Fault Pre-locator is capable of giving IR tests in Bridge mode.
SKU: n/a
