Resistance to Fire with Water

 Specification Compliance:

1. BS 6387
2. BS 7846
3. BS 8491
4. BS EN 50200
5. IEC 60331-21
6. IEC 60331-1
7. Model Number:-D212

Sprinkler (design as specified in the standard) withstand is provided and placed suitably in the water tank at an appropriate distance from the cable jig.

500 mm face Burner with Ventura Mixer with Flow Control Console: Analog or Digital as per customer requirement

Water Console & Sprinkler system: The equipment is supplied with a water console equipped with a booster pump and flow meter with pressure control and flow control knob levers.

Test Rig: comprises suitable water tank in compliance to dimensions specified in BS 6387 2013 wherein and cable is mounted using clips on is sample stand designed as pen specification.

It has Unit is equipped with an Automatic FAULT DETECTION system for:

Short Circuit Detection

Open Circuit Detection

It has a suitable water collection tray is provided to calibrate the amount of water to be collected in the tray as per specification requirement

Frequently asked questions:-

What is resistant to fire?    

It has so resistant to fire that and a specified time and under conditions of a standard heat intensity it will not a fail structurally or allow transit of heat witch will not permit the side away solution

How do you make something fire resistant?

Boric Acid 1 gallon of water Mix thoroughly and spray on or dip From the National Fire Protection Association 9 oz. Borax Powder 4 oz. Solution should drip off material. Before using any flame-treated fabrics on stage, the material should be tested to make sure that was fabric is indeed flame retardant.