Resistance to Fire Alone
<p class="stock in-stock"></p>
Resistance To Fire Alone:
This is fire resistance test alone. In this test cable sample under test is held by means of suitable clamps. Five rings are provided for smaller diameter cables.
Specification Compliance:
- BS 6387
- IEC 60331-21
- IEC 60331-1/2/3/4
- Model Number:-D213
Features:
1. The middle portion of the cable is supported by 2 metals rings and three additional support
2. Resistance to fire alone test is compliant to IEC 60331-21 including
Short Circuit Detection
Open Circuit Detection
3. It has the unit is equipped with an appropriate circuit breaker with transformer protection and digital overload relay as specified in the test standard.
4. Fully automatic 3 single phase power supply
5. PLC microprocessor based control system
6. Automatic current adjustment
7. Automatic fault detection system
Model: D213
Related products
-
Reaction to Fire Testing
UV Test Chamber as per ASTM G 153 & ASTM G 154 /ISO 4892-3
• A Programmed Timer automatically controls the UV & Condensation cycles of the UVCON &
programming.
• Temperature is measured & controlled by a solid state circuit. A PT-100 Sensor is
mounted in a black aluminum panel on the specimen rack.
• The temperature is set by the Operator & monitored by Digital panel meter on the
Control Panel. Note:- This version is with UV lamps but Xenon Arc (ISO 4892-2) is also
available on request.
The instrument Generally comprises:-
• A Double Walled Chamber for sample burning with front glass door
• A Burner settable 0- 90 o angle and precise gas control system including gas regulator
• Microprocessor control Burner Moving system
• Sample Holding System (adjustable both vertically and horizontally)
• Digital Timer for flame application (can be preset for 1 to 99 sec)
• Digital timer for flame observation after flame is removed.SKU: n/a -
General & Physical Tests
Horizontal Cold Chamber up to -86 deg
Techtrivial designs and develop many ranges of cold chambers for cable and plastic compounding industry. Our range goes from -23 Degree Celsius to -86 degree Celsius where you can test not only servo cables with -15 degree Celsius operating temperature but also Arctic grade cables up to -86 degree Celsius.
SKU: n/a -
-
Reaction to Fire Testing
Halogen Gas Emission Test Apparatus as per IEC-60754
- The instrument comprising of
- Tubular Furnace for temp. up to 1000 o C +- 10 o C.
- PID Digital Temp. Indicating Controller.
- Digital Flow Indicator to monitor Air Flow with regulator
- Quartz tube and Quartz boat for keeping samples – one each.
- Gas Washing Bottles – 2 nos. Magnetic stirrer.
- Set of entire Glass (laboratory grade) wares.
- Ph Indicator & Conductivity Indicator ( for zero Halogen) (optional)
SKU: n/a
