Single Vertical Flame Tester

Single Vertical Flame Tester Specification Compliance:

1. IEC 60695-11-2
2. IEC 60332-1: 2015
3. Model Number:-D229

Test methodology requires a? Cable sample of approximately 600mm to be placed vertically between two clamps A burner flame is then applied for? The duration

After the designated cable should self-extinguish length of time, the flame is removed

Vertical Flame Test assesses the flame Retardant BS EN 60331-1-2 is designed to properties on a single cable length

A fire performance test is meaning all layers of the cable performed on single conductors construction are finished cable or the insulated subjected to the burner flame.

TEST EQUIPMENT INCLUDES:

Burner

Manometers

Control Valves to set the desired flow rates

Mass Flow Controllers/Conventional Flow Controllers

Copper Block for Calibration

Temperature Indicator and Timer

Thermocouple K Type 0.5 mm

Laboratory Fume Hood/Chamber in Stainless Steel as per dimensions specified in IEC 60332-1:2015

Frequently asked questions:-   

What is the Single Vertical Flame Tester?     

The Vertical Flame Test this Vertical Flame Test for fire propagation forms to BSEN 60331-1-2 is designed to assess the flame After the designated length of time, the flame is retardant properties on a single cable length. Part of The Cable Lab’s cable testing capabilities. Removed and the cable should self-extinguish.

What tests are done for cable?

Persulphate test

Annealing test

Tensile test

Wrapping test

Conductor resistance test

Test for the thickness of insulation

Measurement of the overall diameter

You can also check out our Machinery Products.