Multifunction Power Transducer with Display TRMT
This is Multifunction Power Transducer with Display TRMT. This is made in compliance with industry quality standard, latest technology, high quality raw material.
Service Details:
W van WH Vary PF Accuracy: +/- 0.5% F.S
Frequency Accuracy: +/-0.02Hz
Voltage and Current Accuracy: +/- 0.2% F.S
Model Number:-D154
Features:
Easy Installation & Space-saving
Frequency
Meets to DN-IEC 688
Individual Phase to neutral Voltage
Individual Phase watt
Simultaneous detect & display
Phase to Phase Voltages
Total Varo
Power Factor
Individual Phase Current
Total Watt
Watt Hour (10 digits)
Vat Hour (10 digits)
Circuit selection of 1f2W, 1f3W, 3f3W, 3f4W
Auto/Manual scrolling Display CT Ratio & PT Ratio – user settable on the instrument by front panel keys
RS 485 output
Analogy & Digital outputs available (Optional).
High Dielectric Strength: AC 2KV/min, between Input/output/Power/Case.
Band Rate user-selectable 2400/4800/960/19200/38400.
Digital outputs available for kohl & KVARH (Optional) Baud Rate: 1200, 2400,4800,9600,19200,38400 user selectable.
High Brightness LED Display. RS-485
Cable ABS plastic fire retardant case, DIN Rail & Wall Mounting Up to 255 units can be connected on single
Related products
-
-
Electrical & Electronic
IEC60754 Intelligent Halogen Acid Gas Release Determination Test
Intelligent Halogen Acid Gas Release Determination Test Device is used to determine the total halogen acid gas of low halogen and halogen-free flame retardant cable and to measure the acidity of the gas by measuring the PH value and conductivity. It in line with IEC60754 standard.
SKU: n/a -
Electrical & Electronic
Building Material and Structure Surface Flame Spread Tester
Building Material and Structure Surface Flame Spread Tester is Applicable to the determination of the propagation of flame along the surface of a vertical plate specimen the results of which are suitable for comparing the fire performance of exposed surfaces of walls or ceilings.
SKU: n/a