AC Voltage Transducer TDV, TDVR, TDV3, TDVR3

Service Details:

Input Range: 0.2% RO at 23 C +/- 5 C (Self-Power Mode 0.25% RO at 23 C +/- 5 C)

Impulse: 5KV (1.2X50 mS), ANSI C37.90a / 1983 DIN, IEC 255 – 4, IEC 688-1992 2.5KV – 0.25mS / 1MHz IEC 801-3

Model Number:-D152

Input Burden: 0.2% RO at 23 C +/- 5 C (Self-Power Mode 0.25% RO at 23 C +/- 5 C)

Accuracy Class: 0.2% RO at 23 C +/- 5 C (Self-Power Mode 0.25% RO at 23 C +/- 5 C)

Output load: DC Current Mode 10V DC Maximum

Calibration: SPAN and ZERO +/- 10%

 

Features:

ABS Plastic Case, DIN Rail or Wall Mounting

High Accuracy 0.2% RO at 23 C± 5 C Dual Aux

Power 110/220V AC High Dielectric Strength 2.6KV AC / Min, Between Input / Output/ Power Case High Dielectric Strength 2.6KV AC / Min, Between Input / Output/ Power Case

SPECIFICATION

 

Input Range:* Normal Voltage 110V* Effective 50 ~ 150V.

Input Burden: 0.1VA/60Hz at 150V AC

Curacy: 0.2%RO at 23°C + 5°C (Self-Power Mode 0.25% RO at 23°C + 5°C).

Input Over:* Normal AC 110V* Voltage Over 500V Continuous.

Output Load: DC Current Mode: 10V DC Maximum, DC Voltage

Self-Power Mode 150V AC Maximum.

Impulse: 5KV (1.2X50 plus), ANSI C37.90a/1983. DIN, IEC 255 – 4, IEC 688-1992

Dielectric Strength – 2.6KV AC /1 Min

25KV – 0.25mS/1MHz IEC 801-3 (Ring WAVE)

Common Mode Rejection: >120db, 50/60Hz

Stability – <0.2% / Year

Calibration – SPAN and ZERO * 10%

Response Time & Ripple (p-p): <400mS. 0~99%; 0.5% P-P (STD)

Temperature Coefficient: =100ppm / “C from 0~60°C; =50ppm / 23C+£3C

Operating Condition 1 -10°C ~ + 65°C, 20 ~ 95% RH Non-Condensed.

Magnetic Effect – DIN – IEE688 <0.005% Change 10″ Center 100A – Turn.

Storage Condition: -40°C ~ + 75°C, 20 ~ 95% RH Non-Condensed.

Power Supply: AC or DC +20%, 50/60Hz 1¢ 3VA/AC: 3¢ 3VA/AC.

Aux. Power Effect 1 <0.01%/ V.

Housing Material: ABS Plastic, Self-Extinguishing to UL Subject 94 Class V-O Case IP 50

Snap Mounting On DIN EN 50022-35 Or Surface Mounting. Compliance With

IEC 529, BS 5490, Din 40054. Protection Touch-Proof Terminals and

Enclosure Meeting Requirements Of VBG 4 & VDE 0106 oart 100(Germany).

Mounting: DIN Rail or Wall Mounting

Size ©1¢ [50″X 115″ X 734 mm]; 3 ¢ [120″ X 115” X 73.4* mm]

Self-Power Mode Effective Range 85 ~ 150V, Power Source From V, Voltage.