Automobile Wire or Cable Insulation Sheath Abrasion Resistance Tester

Specifications:-

Warranty:-1 Year

Exercise frequency:-10 ~ 60 times/min

Specimen length:-About 750 mm

Count:-4 bits

Model Number:-D554

Application:-Wire & Cable

Power supply:-AC220 (+ 10%) V/50HZ

Power:-Electronic

Weights:-400g, 700g, 1000g

Standard:-ISO6722

Number of trials:-4 times

Product Description

ISO 6722 Automobile Wire or Cable Insulation Sheath Abrasion Resistance Tester

 

 Description:-

The test Technical Conditions for Cable Ordering machine meets the ISO 6722 ” of Railway Locomotives and Rolling Stocks – Test” standard, and the test method for mechanical Cable Sheath Scraping and Grinding and physical Test. It is suitable times whether the sample has for wire and cable industry to scrape and grind the sample cracks or breaks after a fixed number at properties – Extrusion Sheath Scraping and grinding a certain speed until it of scraping and grinding, or to observe cracks or breaks, and record the of scraping and grinding.

Technical parameters:-
Test power supply	AC220 (+ 10%) V/50HZ
Radius of curvature of the scraper	R=0.125mm
Scraper device	Moves in two directions along the wire axis, and the stroke of the scraper is more than 10mm.
Exercise frequency	10~60 times/min
Number of trials	4 times
Count	4 bits
Specimen length	About 750mm, is fixed on a steel anvil.
Weights	400g, 700g, 1000g (weights applied to scraping pins)
Function	When the insulation the equipment will alarm and contact with the needle is worn through the conductor, and stop.
The minimum distance between the test points and the end of the specimen	More than 10 mm. Each test sample rotates 90 degrees (i.e., scraping the other side, so that the one side, turning 90 degrees, specimen can be scraped sufficiently).

 

Frequently Asked Questions:-

What is ISO 6722?

It specifies the dimensions, single-core 60 V cables intended test methods, and requirements for use in road or applications where the nominal vehicle system voltage is equal to less than (60 V d.c. or 25 V a.c.).

What do you mean by ISO?

International Organization for independent, non-governmental, safety and efficiency of products, international Standardization organization that develops standards to ensure ISO (International Organization for Standardization) is a quality, services, and systems.

What is abrasion resistance test?

Abrasion testing is of solid materials. The abrasive resistance to scratching abrasion intent of abrasion rank materials in their resistance testing is to produce that will reproducibly used to test the data under a specified set of conditions.

What is a sheath test?

Sheath Resistance for identifying potential cable faults commonly testing is a key onsite diagnostic me ohmmeter to measure the resistance of test the cross-linked or thermoplastic compound to known as a Mugger Test, it uses an applied DC voltage.

What is the insulation resistance of cable?

Insulation resistance cables insulation key test for electrical effectively may result in short circuit as it is a measure of how testing is the cable is insulated.