Building Materials and Elements Fire Resistant Test Equipment
<p class="stock in-stock"></p>
Building Materials and Elements Fire Resistant Test Equipment is used to check weather building material is flammable or flame retardent. It is in line with GB/T8625-2005 standard.
Building material and elements fire resistant test equipment is used to diagnose either building material are flammable or not. Its designs, production and other aspects are in line with standard GB/T8625-2005.
Specifications:-
Warranty:-1 year
Power supply:-AC380V, 50HZ
Air flow:-2.5 – 25 L/min
Model Number:-D305
Power:- Ac380v
Customized support:-OEM, ODM
Surface dealing:-Baking finish
Application:-Building Material Test
Standard:-DIN 4102
Control cabinet:-L800 * W550 * H1700 mm
Gas flow rate:-6 – 60 L/min
Furnace chamber:-L1600 * W1003 * H3930 mm
| Technical parameters | |
| Working power | AC380V, 50HZ, the total power is 2KW |
| Combustion gas | Methane with a purity greater than 95%, or gas of the same purity |
| Gas flow rate | 6-60 L/min |
| Air flow | 2.5-25 L/min |
| Measurement of the pressure inside the furnace | The use of precision 0.5 differential pressure transmitter |
| Burner | Stainless steel production, in the center of the combustion chamber, 1000mm from the bottom horizontally placed of the furnace |
| Flue | The flue of is a square passage with a cross-sectional the burning shaft furnace area of 500mm x 500mm, and of the furnace, the lower part is connected with the combustion is located at exhaust the exhaust gas to the top chamber, and the upper part is chimney. The device is equipped connected with the external with a. When the test is completed, the powerful exhaust fan exhaust fan system is activated to the outside. |
| Test piece bracket | L380 x W380 x H1000 mm, made of high quality stainless steel |
| Control cabinet size | L800 x W550 x H1700 mm |
| Burning shaft furnace size | L1600 x W1003 x H3930 mm |
Frequently Asked Questions:-
What for DIN Stands?
DIN stands, meaning “German institute for Detaches Institute fur Norming is a German national body that deals with the most standardization”. It diverse standard subjects.
Related products
-
Electrical & Electronic
Cable Fault Pre-Locator
This tester combines both pulse reflecting technology (TDR) & intelligent Bridge testing (Bridge) for measuring the exact fault location such as broken line, cross faults, earthing, poor insulation & poor contact of the lead covered cables also as plastic cables. Cable Fault Pre-locator is capable of giving IR tests in Bridge mode.
SKU: n/a -
-
Electrical & Electronic
IEC60754 Intelligent Halogen Acid Gas Release Determination Test
Intelligent Halogen Acid Gas Release Determination Test Device is used to determine the total halogen acid gas of low halogen and halogen-free flame retardant cable and to measure the acidity of the gas by measuring the PH value and conductivity. It in line with IEC60754 standard.
SKU: n/a
