Durable Constant Temperature Humidity Climate Test Chamber for Electronics has performance index meets the requirements of GB5170, 2, 3, 5, 6-95, GB 2423.1-89 (IEC68-2-1) and other international test standards. This equipment is used to check stability in low temperature, high temperature, constant humidity and alternating humidity conditions.
0€
IEC 68 Durable Constant Temperature Humidity Climate Control Chamber for Electronics
Warranty:-1 year, 1 Year
Certification:-UL, GS
Standard:-IEC 68
Temperature deviation:-≤ ± 2 ℃
Model Number:-D432
Power: Electronic
Material:-SUS 304 Stainless Steel
Temperature range:–40℃ ~ 150℃
Heating time:-about 4 ℃/min (no-load nonlinear)
Customized support:-OEM, ODM
Temperature fluctuation:-± 0.5 ℃
Cooling time:-about 1 ℃/min (no-load nonlinear)
Humidity range:-20% – 98% R.H
Humidity fluctuation:-± 2.5% R.H
Durable Constant Temperature Humidity Climate Control Chamber for Electronics
| Main parameters: refers to the air-cooled at room temperature 20 ℃, no load:- | |
| Size | Laboratory space: W400 x H500 x D400 mm |
| Temperature range | – 40 ℃ ~ 150 ℃ |
| Temperature fluctuation | ± 0.5 ℃ |
| Temperature deviation | ≤± 2 ℃ |
| Heating time | about 4 degrees / min (no-load nonlinear) |
| Cooling time | about 1 degree / min (no-load nonlinear) |
| Humidity range | 20% – 98% R.H |
| Humidity fluctuation | ± 2.5% R.H |
| Humidity deviation | ≤ 3% |
There is no strong vibration around
Performance guarantee range: 5 ~ 35 ℃
Relative humidity: no more than 85%
Atmospheric pressure: 86 ~ 106 kpa
Allowable temperature range: 0 ~ 35 ℃
You can also check out our more Machinery Products.
Plastic Smoke Density Measuring Instrument Smoke Density Tester is suitable for measuring the specific optical density of the smoke produced during the combustion of plastics. It is in line with standard GB/T8323.2-2008 “Plastic Smoke Generation-Part 2: Test Method for Measuring Smoke Density by Single Chamber Method”.
Building Material and Structure Surface Flame Spread Tester is Applicable to the determination of the propagation of flame along the surface of a vertical plate specimen the results of which are suitable for comparing the fire performance of exposed surfaces of walls or ceilings.
In Cable manufacturing at the final stage of testing, Continuity test is a standard practice and should be carried on each conductor. It is better to conduct Continuity test before HV test so that further damage of cable can be avoided in case the continuity is not shown by the conductor cores.
