IEC 60754 Electric Cables Halogen Acid Gas Release pH and Conductivity Measuring
<p class="stock in-stock"></p>
Electric Cables Halogen Acid Gas Release pH and Conductivity Measuring device is used to determine the total halogen acid gas of low halogen and halogen-free flame retardant cable and to measure the acidity of the gas by measuring the PH value and conductivity. It is in line with IEC 60754 standard.
IEC60754 Electric Cables Halogen Acid Gas Release pH and Conductivity Measuring
Specifications:-
Customized support:-OEM, ODM
Sampling:-500 mg ~ 1000 mg
Test Material:-PE, PVC and SRPVC
Conductivity meter:-(0 ~ 1 * 105) S/cm
Dimension:-L1700 * W600 * H800 mm
Power:-Electronic
Standard:-IEC60754
Model Number:-D367
Digital PH meter:-Accuracy is 0.02 PH
Power supply:-AC220V, 50HZ
Airflow meter:-50 ml ~ 500 ml
Material:-SUS 304 Stainless Steel
Product Description
IEC 60754 Electric Cables Halogen Acid Gas Release pH and Conductivity Measuring Instrument
Description:-
Wire and cable device is used to determine and halogen-free flame retardant cable the total halogen combustion halogen acid gas measuring acid gas of low of the gas by measuring the PH value and conductivity halogen and to measure convenient for wire and cable manufacturers, the acidity. Its design conforms to GB/T17650.1-1998, GB/T17650.2-1998 and IEC60754.1-1998, also meets GB/T19666-2005 “flame retardant” The provisions IEC60754.2-1991 standards, and of Table 6 of the Standard and General Rules requirements of Articles 6.3.4 of GA306.1-2007, 6.3.4 of GA306.2-2007, 9.10 and 9.11 of UL2556-2007. The equipment for Refractory Wires and Cables and is accurate in testing, reasonable in structure, and simple in operation. It is colleges and universities, commodity inspection departments, and scientific research units.
Frequently Asked Questions:-
What is IEC 60754?
It is a fire test method that the data used to determine acidity in fire gases from generates combustion of cable material.
What is an electrical cable called?
While used interchangeably, a wire is one electrical term wire and cable are often conductor group of wires, encased insheathing. Electric wires and cable is multiple conductors, or are typically made of aluminum or copper.
What is the meaning of electrical wire?
Electrical wiring is associated with devices such as and light fittings in switches, distribution, and electrical installation of cabling and boards, sockets, a structure.
What is electrical cable and its types?
The cable distribution of electrical power is known namely, conductor, dielectric as the electrical that is used for the transmission and power cable. It is used for the transmission lines are impractical of high voltages in places where overhead to use. The power cable is made of three main components and a sheath.
D367 | IEC 60754 Electric Cables Halogen Acid Gas Release pH and Conductivity Measuring
You can also check out our more Machinery Products.
Related products
-
Electrical & Electronic
Cable Fault Pre-Locator
This tester combines both pulse reflecting technology (TDR) & intelligent Bridge testing (Bridge) for measuring the exact fault location such as broken line, cross faults, earthing, poor insulation & poor contact of the lead covered cables also as plastic cables. Cable Fault Pre-locator is capable of giving IR tests in Bridge mode.
SKU: n/a -
Electrical & Electronic
Continuity Voltage Tester
In Cable manufacturing at the final stage of testing, Continuity test is a standard practice and should be carried on each conductor. It is better to conduct Continuity test before HV test so that further damage of cable can be avoided in case the continuity is not shown by the conductor cores.
SKU: n/a
