Extruded Insulation Sheath Abrasion Testing Machine

Specifications:-

Radius of steel angle scraping head:-1-2 mm

Warranty:-1 Year

Scraping speed:-150-300 mm/s

Power supply:-AC220 V, 50 Hz

Power:-Electronic

Application:-Wire or Cable Extruded Insulation Sheath

Model Number:-D570

Counting range:-0 ~ 9999999 times

Standard:-IEC 60229

Stroke of scraping head:-≤ 610 mm

Product Description

IEC 60229 Extruded Insulation Sheath Abrasion Testing Machine

Main parameters:-
(1) The curvature scraping radius of steel angle head: 1-2mm
(2) The scraping stroke of head: ≤ 610mm
(3) Scraping speed: 150-300 mm/s
(4) Counting range: 0 ~ 9999999 times, arbitrary setting
(5) It is and wear test of plastic applicable to the scratch jacket with diameter of 110mm the maximum outer and below 130mm.
(6) Power supply requirements: AC220 V, 50 Hz
(7) Total power: 1KW

Equipment structure:-
The instrument box is integral structure, and the middle working table is located in an of the whole machine.
There is one, is located piece of clamp and the pressing handle on the left and right at the lower end of the chassis.

Mechanical drive system:-
The mechanical operation is driven by servo motor + screw rod + guide rail.

Frequently Asked Questions:-

What is IEC 60229?

It provides a range of electric and a special protective function for use in insulated systems cables which have extruded tests which may be required for over sheath The standard covers where that over sheath performs cables and in insulated systems.

What is the purpose of the abrasion test?

The intent of abrasion conditions will produce scratching abrasion specified set of the reproducibly assist We offer and wear in choosing testing is to rank materials in their resistance to best method test methods, and can data that various abrasion under a for your project.

What is the purpose of sheath?

Cable sheaths wraps hold and protects Sheaths other purposes A variety are used in outside of a cable to on the inside cabling for electricity the varying transmission, telecommunications conductors around the of types are available to handle and voltages and settings.

How is abrasion resistance test done?

Abrasion with an unprinted simulate resistance printed sample the actual tests are performed by rubbing a one to conditions.

What is Extruded Insulation?

Extruded polystyrene through an closed cell rigid insulation. Expanded manufactured a insulation or EPS polystyrene a mound to contain small foam extrusion process This produces insulation or XPS Insulation is insulation is manufactured using beads.