Flame Resistant Treated Paper and Paperboard Testing Machine is suitable for testing paper and paperboard with a thickness of 1.6mm or less. Example: flame-retardant paper products, flame-retardant paper and paperboard.
It is in line with standard of GB/T14656-2009 “Test Method for Combustion Performance of Flame Retardant Paper and Paperboard”.
Customized support:-OEM, ODM
Gas source:-Natural gas or propane
Working power:-AC220V, 50HZ
Material:-SUS 304 Stainless Steel
Application:-Paper and Paperboard
Test flame:-Bunsen burner
Timer:-0 to 99.99s
Bottom fixing frame:-L795 * W350 * H895 mm
|Components||A combustion box, a control box, a gas supply system, and a sample holder|
|Control box||It consists of box, pressure regulating valve and function pressure gauge, flow meter, timer, switch|
|Burning test box||The material (355×305) mm SUS304 stainless steel; the is bottom of the box is and the height is 760mm. The with a high temperature resistant glass door test box is additionally provided with a bayonet for observing the burning phenomenon.|
|Baffle & holes||There is a baffle box, and 16 vent holes with a diameter of at 25mm below the top plate of the 12.5mm are evenly plate. There are 8 vent holes with distributed on the top diameter φ12.5mm on each side of the box, and the bottom of the hole is φ25mm from the bottom of the box.|
|Sample holder||The sample holder SUS304 stainless steel clamp suspended is an inverted “U” type material in the center of the box. It mm, and the long axis of the sample after clamping. Located in the vertical direction. When can hold the sample of size (70×210) clamping the specimen, it should length of the specimen at a distance of 10 mm from be clamped along the entire the edge
The exposed surface is (50×210) mm. The to the top of the tank and can be outside the specimen clamp should be connected holder to observe the two cabinet. Rotate the specimen sides of the specimen.
|Test flame||The test flame is φ10mm, which is located at the center of the bottom edge of the sample. The top of the lamp is 19mm away from provided by Bunsen burner. The inner diameter of the lamp is the, and the air supply of the burner is adjusted. To produce a flame of (40 ± 2) mm high. The Bunsen bottom edge of the sample. The ignition time of the sample is 12s burner is made of copper.|
|Gas source||Natural gas or propane can usually be used, and the input pressure should be (17.2±1.8) kPa.|
|Ignition mode||High-voltage electronic automatic ignition system is adopted.|
|Timer||Flame time, afterburning time, burning time can be arbitrarily set from 0 to 99.99s, the accuracy is 1s / h, the resolution is 0.01s.|
|Working power||AC220V, 50HZ|
|Product dimensions||L795 x W350 x H895 mm|
Frequently Asked Questions:-
What is the difference between ASTM and ISO?
ASTM is a national organization. ISO is an international organization that is a part of ISO organizations that has representations from all countries including ASTM.
What does ASTM compliant mean?
American Society known as American Society for Testing and for Testing and Materials ASTM International, formerly Materials, is an international and publishes voluntary consensus technical standards for a wide standards organization that develops range of materials, products, systems, and services.
What is ASTM test method?
ASTM test methods are worldwide for quality and reliability. ASTM test methods petroleum industry standards, accepted for petroleum and Petrochemical Test Directory.
what is ASTM D4433?
It is the top general gasket material. This excellent seal for compressors, load bearing, creep relaxation material offers purpose high performance compressed and chemical resistance. This material is typically used as a gasket or pipe flanges, manways, pumps and valves.