Heat Distortion Test
<p class="stock in-stock"></p>
Heat Distortion Test is a standard test used to assess the temperature at which a polymer, plastic or plastic composite specimen deforms under a given flexural load. Either it is based on Flow Meter Measurement, here equipment is fitted with rotameter. We can also use air velocity method.
Standard Compliance:
Fresh air is admitted by the high capacity blower, controlled by means of damper & measured using differential air velocity sensor for required 100-200 air changes per hour.
Model Number:-D195
Method 1:
Based on Flow Meter Measurement
The equipment is fitted with a Rota meter an external air source is arranged by the oven via flow meter fitted with needle valve control The customer to provide forced-air inside
Method 2:
Heat distortion assembly is affixed inside the aforesaid oven Air blow with air velocity tunnel equipped with differential air velocity measurement probe is connected to the oven. According to the standard? UL-1581 Reference standard
Deviceisused for measuring the deformation test of wire under a certain temperature and load
3 test stations suitable for various cable sizes.
Lower end diameter of pressure bar: 9.5? 0.2mm
Upper end diameter of pressure bar: ?19?0.2mm
Total weight of pressure bar: 250g
Multi-Station: 3
Frequently asked questions:-
What is a heat distortion test?
Heat distortion temperature testing of plastics is a standard test used to assess the temperature at which the properties of plastics, as of all materials, depending on the temperature polymer
Related products
-
Electrical & Electronic
Continuity Voltage Tester
In Cable manufacturing at the final stage of testing, Continuity test is a standard practice and should be carried on each conductor. It is better to conduct Continuity test before HV test so that further damage of cable can be avoided in case the continuity is not shown by the conductor cores.
SKU: n/a -
Electrical & Electronic
Cable Fault Pre-Locator
This tester combines both pulse reflecting technology (TDR) & intelligent Bridge testing (Bridge) for measuring the exact fault location such as broken line, cross faults, earthing, poor insulation & poor contact of the lead covered cables also as plastic cables. Cable Fault Pre-locator is capable of giving IR tests in Bridge mode.
SKU: n/a -
