IEC 60587 10KV High Voltage Current Leakage Tracking Index Tester

IEC 60587 10KV High Voltage Current Leakage Tracking Index Tester

Specifications:-

Applied voltage:-AC/DC 100V ~ 10000 V±5% adjustable

Material:-SUS 304 Stainless Steel

Drip interval time:-0 – 99.99s continuously adjustable

Temperature:-23 ± 2 ℃

Power supply:-AC220 (±10%) V / 50 HZ

Air pressure:-86 ~ 106 kph

Power:-Electronic

Test Material:-PE, PVC and SRPVC

Model Number:-D401

Dimension:-L1245 * W723 * H2295 mm

Standard:-IEC 60587

Product Description

10KV High Tracking Index Tester Voltage Current Leakage

Application:-

High voltage tracking for testing the conforms to the requirements resistance to testing equipment is and corrosion of electrical and electronic suitable insulation materials is evaluated electric tracing products, materials. The resistance to electric tracing and corrosion household appliances and their electrical by measuring the liquid contaminants and oblique resistance to electric tracing and corrosion samples. Its design of GB/T6553-2003 and IEC60587-1984 standard

 

Main Technical Parameters

Applied voltage: AC/DC 100V ~ 10000 V±5% adjustable.

Applied current: AC/0 ~ 100mA±1% + 5d, DC/0 ~ 100 mA±1% + 3d.

The output measured should not exceed 5% when the voltage drop of the test device current at 60 mA of continuous 0.5s.

Electrode: lower electrodes are 0.5 mm, which is the thickness of the upper and is 304 stainless steel.

The distance lower electrodes to the upper and mm±0.5 mm are 50.0 the.

Frequently Asked Questions:-

What is tracking in High Voltage?

The High X (HVTR) test method is properties can high voltages a result that tracking paths are extent deteriorate to such users to the metric system, “kilo” is the assess tracking of insulating the susceptibility to materials outdoors. Their electrical insulation that is exposed to as a formed on the insulator surface

How do you test for High Voltage?

The testing is applied across a limit the short circuit current test by means of a high voltage occurred in the device specimen of insulation or equipment procedure is very simple. High voltage under A resistor is connected with series with the transformer in the event of breakdown under test.

Why high voltage test is required?

High Voltage the device type and the acceptable current amount of voltage applied to operate to check the effectiveness of its safety during testing is usually performed to qualify rated electrical conditions, away insulation. The objective sought during the high voltage testing will determine the flow.

You can also check out our more Machinery Products.