Horizontal Burning Characteristics Test Machine

Specifications:-

Test Material:-Foamed plastics

Relative humidity:-≤ 75%

Material:-SUS 304 Stainless Steel

Model Number:-D363

Dimension:-L1130 x W630 x H1305 mm

Standard:-ISO845-1985

Nozzle inner diameter:-0.375 inches

Ambient temperature:-~40℃ at room temperature

Flame height:-Blue flame of 38 mm

Power supply:-AC220V±10V, 50HZ

Description:-

Horizontal combustion the technical samples with density less than specifications of small foam suitable for and tester for foamed plastics satisfies requirements “Test Method for measured by ISO845 Combustibility of Foam Plastics – Horizontal stipulated in GB/T8332-2008 Combustion Method”. It is combustion performance evaluating the horizontal plastic 250kg/m3 -1985 under laboratory conditions.

Main Technical Parameters:-

(1) Self-made blower, with the ISO10093.1998 fully comply standard.

(2) The specifications of the fire nozzle: inner9.5 mm, cylinder without tail length diameter 100mm, cylinder body device.

(3) Flare wing top: Wing 48 mm, internal head opening length width 1.3 mm

(4) Flame height: blue flame of 38 mm height.

(5) Sample mesh: 0.8mm 6.4 mm on beside the installation of a 300 mm each side, mesh stainless steel wire, mesh length length 215 mm, width 75 mm, height 13 mm, steel ruler, the minimum scale is 1.0 mm.

(6) Bracket: It is with fixture which can sample bracket is 175 mm be adjusted to compose of two iron frames angle and height. The desired above the bottom of the chamber

(7) Timer: 0 ~ 99.99s can be set arbitrarily, the accuracy ≤ 1s.

(8) Measure the. The minimum scale is 1.0 mm blue flame scale in combustion.

(9) Gas source: natural gas with a calorific value of 37 mJ/m3

(10) Standard sample size: long ≤ 13 mm150 mm, wide 50 mm, 5 < thickness

(11) Outline size: L1130 x W630 x H1305 mm

Frequently Asked Questions:-

What is the difference between ASTM and ISO?

ASTM is a national of ISO organizations. ISO is an organization that has representations that is a part international from all countries including ASTM.

What is Horizontal Burning Characteristics Test?

It is a Standard Characteristics of Cellular Polymeric Test Method for Horizontal Burning Materials. 1.1 This apparatus test procedure for comparing the test method describes a small-scale relative rate of burning of cellular polymeric of burning and the extent and time materials.