Low & Ultra-Low Temp Cold Chamber Machine (for -0 to -86 C )
- Cold Chamber Size (as per requirement of customer)
- Digital Temperature Indicating controller
- Glass Window on the door. (if required)
- Very high displacement compressor of about 22 per revolution
- Highly efficient refrigerant R404A having a boiling pt. Of -46DegC
- Our freezer does not require a low ambient temp. It can work even at an ambient of 40DegC
- Feed evaporator to improve the refrigeration effect and coeff. Of performance of the system as a whole
- High density PUF of about 60kg/cm3 so as to hold the temperature for a longer time
- Hot discharge is circulated on the mouth of the freezer to prevent cooling losses
- Microprocessor based temperature controller for accurate temperature and longer compressor life.
- Standard compressor of 1 hp with Cascading Refrigeration System
- Copper Capillary of higher wall thickness to last longer
- Uniform capillary distribution on the surface of chamber for faster and uniform cooling within chamber.
- Double door formation (acrylic + normal) for better insulation
- Noise less operations
Based on 0 reviews
Be the first to review “Low & Ultra-Low Temp Cold Chamber Machine (for -0 to -86 C )”
You must be logged in to post a review.
You may also like…
-
General & Physical Tests
Vertical Cold Chamber upto -86 deg
Cold chambers are and integral part of any cable test laboratory. They are helpful in performing cold bending, cold elongation and cold impart tests as per latest revision of IEC-60811 5 and 6 series. Techtrivial has many different designs and sizes for vertical cold chambers ranging from -15 degree Celsius to -86 degree Celsius.
SKU: n/a
Related products
-
General & Physical Tests
Cold Bend Test | Cold Impact Test
IEC 60811-504 describes the cold bend test method for cables under low temperatures. The cold bend test on cable is only possible upto a maximum diameter of 12.5mm. The test is mainly conclusive to understand the flexibility and strength of plastic used over cable under low temperatures.
Whereas cold impact test on cables is performed according to IEC 60811-506. This test is mainly designed to simulate the plastic’s capacity to resist mechanical shock under cold environment.Here from a certain height, mandrels of specific weight are dropped on the cable.
SKU: n/a -
General & Physical Tests
Horizontal Cold Chamber up to -86 deg
Techtrivial designs and develop many ranges of cold chambers for cable and plastic compounding industry. Our range goes from -23 Degree Celsius to -86 degree Celsius where you can test not only servo cables with -15 degree Celsius operating temperature but also Arctic grade cables up to -86 degree Celsius.
SKU: n/a -
General & Physical Tests
100L High Temperature Constant Temperature Oil Bath
100L High Temperature Constant Temperature Oil Bath is suitable for oil resistance test of plastics such as enameled wire and insulating covering. The test piece is immersed in the test oil at a predetermined temperature, and after a certain period of time tensile residual value is measured. It is in line with GB/T 2951 , GB/T 5023, GB/T 5013, UL, VDE, CSA, JIS and other standards.
SKU: n/a -
Automated Testing, General & Physical Tests, Machinery
Optical Profile Projector for cable
We have all range of Profile projectors suitable for cable and automotive manufacturing sector. Market is flooded with inaccurate and camera based profile projectors that are actually not compliant with Vision systems but still expansive as them.
Automatic profile projector for cable used in Cable Dimension measurement of any shape of the cable. Available with Accredited calibration master, color measurement, from 36 mm to 108 mm diameter samples.IEC-60502-1 and EN 50525 describes the requirement of exact dimension measurement of the insulation, inner jacket and outer jacket of a cable and it’s core.
Where you actually lose money?
- Having higher Insulation wall thickness due to the operator’s running safety margin
- Ovality of extrusion head setting causes the inhomogeneous spread of compound over the conductor.
- Due to higher core diameter, each next process of cable manufacturing such as stranding, taping, braiding, armoring, shielding, inner sheathing, outer jacketing takes a minimum of 0.05% to 3% of extra material.
- An average-sized Cable manufacturer who consumes 10 Million euros of plastics per year losses around 300.000 € just because of non-optimized dimension of cables.
We also supply all the measuring components calibrated by NABL accredited master instruments so that accuracy and uncertainty are never a concern for our clients.
SKU: n/a
There are no reviews yet.