ASTM D1238 Melt Flow Index Tester

ASTM D1238 Melt Flow Index Tester

Specifications:-

Warranty:-1 Year

Relative humidity:-30% – 80%

Material:-Baking Finish

Standard:-ASTM D1238

Power supply:-AC220V±10%, 50Hz

Dimensions:-L320 x W510 x H600 mm

Power:-Electronic, 0.5 KW

Model Number:-D419

Ambient temperature:-10℃ – 40℃

Net weight:-About 40 KG

Product Description

ASTM D1238 Melt Flow Index Tester

Technical parameters:-
Temperature control range	Room temperature – 450℃
Temperature display indication error	≤ ±0.1℃
Temperature fluctuation	±0.4℃
Recovery time	≤ 1min quickly temperature after restores the constant filling
Display mode	LED intuitive and clear digital tube display,
Dimensions	L320 x W510 x H600 mm
Power supply	AC220V±10%, connected to the ground wire to prevent electric shock 50Hz the socket must be
Power	0.5KW

Working conditions:-

Ambient temperature: 10℃ – 40℃

Relative humidity: 30% – 80%

Net weight of the instrument: about 40kg (excluding counterweight)

Proper installation on a solid foundation

In an environment free from vibration and corrosive media

No strong magnetic field in the environment, no strong convection in the air

Frequently Asked Questions:-

What is ASTM D1238?

It covers the prescribed conditions of temperature,  molten resins as the timed measurement through a standard measurement of the rate of the extrusion die (2.095 x 8 mm) under load, and piston position in the barrel is being made.

What is the melting flow index used for?

The melt flow index (MFI) or for the ease of flow of melted melt flow rate (MFR) is a measured plastic. It is for quality control often described in the standards used in the plastic industry thermoplastics. The method is ASTM D1238 and ISO 1133.

What is MFI value?

The MFI value refers to the known given orifice to the die and is expressed as the quantity amount of polymer quoted on many datasheets that are extruded through in g/10 mins or for Melt Volume Rate in cm3/10mins

How do you increase the melt flow index?

The more PP PE the higher the market demand injection mound grade PP raises the will ask for as Melt flow (as the contamination you get in the melt flow index). The close to the virgin specs as you can get. There (90/10) and handpicked rigids (80/20) on is lots of optically sorted the marketplace.

You can also check out our more Machinery Products.