IEC884 Plug Pull Test Machine And Push Pull Tester

Specifications:-

Tested level:-Diode triode 10A, 10A and 16A

Model Number:-D548

Material:-SUS 304 Stainless Steel

Size:-L230 x W150 x H550 mm

Application:-Wire and Cable

Power:-Electronic

Standard:-IEC884

Product Description

IEC884 Plug Pull Test Machine

Introduction:-

The Plug Pull Test Machine is GB2009.1, IEC884-1, and others under the standards of electrical accessories related standards. Mainly used for minimum force and unipolar simple structure, easy operation, for detecting the plug and design requirements is pulled out the maximum assembly advantages you to plug pull test machine out the required bolt from the plug bush force. Main to test and 10A pin plug. The electrical test device test diode triode 10A, 10A, and 16A test, 16A has the pullout force to provide convenience.

Note: Outline dimensions: L230 × W150 × H550 mm

Operation steps:-

(1) Put the sample plug into the die holder and connects tightly.

(2) Clamp both sides of the socket.

Matters needing attention:-

When testing, should safety area, in order to put the device and weight in the avoid hidden danger.

(1) Before should be placed on the test, the test device level of the desktop.

(2) Weight avoiding such carelessness should be taken gently, to handling to damage

Frequently Asked Questions:-

What does pulling the plug mean?

To do something, especially by dropping much more, the plug on the no longer probably pull the money to support giving TV network will it: If the viewing figures whole series.

What happens when the plug is pulled?

“Pulling the plug” is a person would survive without the When a patient is no longer viable or there is no term used hope respirator, the machine is actually turned off.

what is Plug Pulling Force Test?

It is to ensure that a pull test machine on a cord doesn’t damage the internal plug terminations. During this test, the plug is mounted in a 45-pin are anchored in the plate degree steel plate. The medical community plug blades and ground A fixture with a rod, striker plate, and a 1.1 kg (2.5 pounds) weight are clamped to the cord.