Resistance to Fire with Mechanical Shock

 Specification Compliance:

1. BS 6387
2. BS 7846
3. BS 8491
4. BS EN 50200
5. IEC 60331-21
6. IEC 60331-1
7. Model Number:-D211

3 stands are provided for this application

Vertical board with its mounting 10 Kg +/- 0.5 Kg also used for test procedure BS EN 50200: Cable orientation Z shape or U shape and Slotted stand as per BS 8491 18 Kg +/-1 Kg (U shape orientation) and IEC 331-2 24 Kg test rig

Rubber bush is used of shore hardness as specified in the test standard.

500 mm face Burner with Ventura Mixer with Flow Control Console: Analog or Digital as per customer requirement

Water jet with flow meter control Automatic cyclic impact device designed as per specification requirements.

FULLY-AUTOMATIC 3 Single Phase power supply unit equipped with phase angle firing drive and PLC microprocessor-based control system for applying PHASE TO PHASE voltage Range: 0-1200 V and automatic current adjustment 0-0.30A

Short Circuit Detection

Open Circuit Detection

The unit is equipped with an appropriate circuit breaker for transformer protection and digital overload relay as specified in the test standard

Frequently asked questions:-

What is resistant to fire?

It has so resistant to fire that for a specified time and under conditions of standard heat intensity it will not fail structurally or allow transit of heat.

How do you make something fire resistant?

The solution should drip off material From Before using any flame-treated fabrics on stage, the material should be tested to make sure that the fabric is indeed flame retardant.