Rock Wool Thermal Insulation Heat Flux Measurement Tester
It is important that mineral wool, when used as an insulation material, is able to withstand high temperature without losing its properties and integrity. Rock wool is a type of mineral wool. With this equipment we can check thermal insulation capacity of rock wool.
Specifications:-
Model Number for Rock Wool Thermal Insulation Heat Flux Measurement Tester :-D255
Power:-Electronic
Heating power:-1000W
Heating rate:-5℃/min ± 0.3℃/ min
Warranty:-1 Year
Application:-Rock Wool
Standard:-ASTM C177
Measurement range:-Room temperature ~ 900℃
Working voltage:-AC220V ± 10V, 50HZ
Material:-SUS 304 Stainless Steel
Dimension:-L900 x W380 x H1300 mm
Technical parameters of Rock Wool Thermal Insulation Heat Flux Measurement Tester |
|
| PLC program | Touch screen control |
| Structure | Mainly composed of two parts: a heating furnace and a control box |
| Heating power | 1000 W |
| Zoom measurement range | Room temperature ~ 900℃ |
| Heating rate | 5℃/min±0.3℃/ min and 3℃/min±0.2℃/min can be set |
| Single-chip computer | Multi-point program temperature |
| Heat source | Adopts hot plate type, which is safe and reliable and has a long service life. |
| Working voltage | AC220V ± 10V, 50HZ |
| Dimension | L900 x W380 x H1300 mm |
Frequently Asked Questions:-
What is ASTM C177 in Rock Wool Thermal Insulation Heat Flux Measurement Tester?
It is the standard test for material by means of must exhibit low thermal a guarded-hot-plate apparatus. For a material to be classified as thermal measuring the a thermal insulator it conductivity of a conductivity throughout this test — which, though not identical, is comparable to ISO 8302
How is rock wool thermal insulation measured?
It is expressed in watts performance. Higher the U-value the worse This means that the thermal of the indicates high building envelope. A low U-value usually per meter squared kelvin levels of insulation.
What are the four best thermal insulators?
- Polyurethane Foam.
- Fiberglass is an extremely popular insulation material.
Related products
-
-
Electrical & Electronic
IEC60754 Intelligent Halogen Acid Gas Release Determination Test
Intelligent Halogen Acid Gas Release Determination Test Device is used to determine the total halogen acid gas of low halogen and halogen-free flame retardant cable and to measure the acidity of the gas by measuring the PH value and conductivity. It in line with IEC60754 standard.
SKU: n/a -
Electrical & Electronic
IEC61034 Wire and Cable Smoke Density Test Chamber
Wire and Cable Smoke Density Test Chamber is used for determination of smoke density of cables and optical cables burning under specific conditions. It is designed and manufactured according to GB/T17651.1-2-1998 standard.
SKU: n/a -
Electrical & Electronic
Continuity Voltage Tester
In Cable manufacturing at the final stage of testing, Continuity test is a standard practice and should be carried on each conductor. It is better to conduct Continuity test before HV test so that further damage of cable can be avoided in case the continuity is not shown by the conductor cores.
SKU: n/a