Natural Gas Safety Valve (Socket)
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
Related products
-
General & Physical Tests
Cold Bend Test | Cold Impact Test
IEC 60811-504 describes the cold bend test method for cables under low temperatures. The cold bend test on cable is only possible upto a maximum diameter of 12.5mm. The test is mainly conclusive to understand the flexibility and strength of plastic used over cable under low temperatures.
Whereas cold impact test on cables is performed according to IEC 60811-506. This test is mainly designed to simulate the plastic’s capacity to resist mechanical shock under cold environment.Here from a certain height, mandrels of specific weight are dropped on the cable.
SKU: n/a -
Automated Testing, General & Physical Tests, Machinery
UV weathering test chamber as per ISO 4892 – XENON ARC
Automated Testing, General & Physical Tests, MachineryUV weathering test chamber as per ISO 4892 – XENON ARC
UV weathering test chamber as per ISO 4892-XENON ARC TEST EQUIPMENT generally compliant with HD 626-2 or ISO 4892-2
The test equipment consists of
- 1-piece water-cooled xenon lamp with inner quartz and outer borosilicate filter
- Programmable color display touch screen controller to control and display test parameters
- Measurement and control of irradiance value at both 340nm, and 300~400nm
- Measurement and control of Black Panel Temperature (BPT)
- Measurement and control of chamber temperature and chamber humidity
- A water spray system with a built-in 50L water reservoir
- An automatic water supply system
- Industrial control panel with ferrule numbering & professional wiring for easy maintenance and troubleshooting
- RS-232 interface, able to connect and programs with Industrial PC/Desktop PC/Laptop
please also check our Fluoroscent Lamp UV weathering test equipment for cost-effective version.
Xenon Arc Test or UV Weathering Test as per ISO 4892-2 & 3
SKU: n/a -
General & Physical Tests
Hot Pressure Deformation Test Tool as per IEC 60811-508
Hot deformation test is also called a hot pressure test is an acceptance test in order to assess high-temperature resistance of the material to deformation. Thermoplastics tend to deform under high temperatures and small damage during movement or under installation to cable, can cause a puncture or cut of insulation. This could result in the circuit break down shutting down the entire system.
According to the famous test institute of Germany, it was said that the most failing test for HO5-HO7V K cables is this test. In order to achieve a high speed of extrusion, manufacturers tend to inadvertently ignore the impact of compound degradation.SKU: n/a -
Automated Testing, General & Physical Tests, Machinery
Optical Profile Projector for cable
We have all range of Profile projectors suitable for cable and automotive manufacturing sector. Market is flooded with inaccurate and camera based profile projectors that are actually not compliant with Vision systems but still expansive as them.
Automatic profile projector for cable used in Cable Dimension measurement of any shape of the cable. Available with Accredited calibration master, color measurement, from 36 mm to 108 mm diameter samples.IEC-60502-1 and EN 50525 describes the requirement of exact dimension measurement of the insulation, inner jacket and outer jacket of a cable and it’s core.
Where you actually lose money?
- Having higher Insulation wall thickness due to the operator’s running safety margin
- Ovality of extrusion head setting causes the inhomogeneous spread of compound over the conductor.
- Due to higher core diameter, each next process of cable manufacturing such as stranding, taping, braiding, armoring, shielding, inner sheathing, outer jacketing takes a minimum of 0.05% to 3% of extra material.
- An average-sized Cable manufacturer who consumes 10 Million euros of plastics per year losses around 300.000 € just because of non-optimized dimension of cables.
We also supply all the measuring components calibrated by NABL accredited master instruments so that accuracy and uncertainty are never a concern for our clients.
SKU: n/a
