Natural Gas Safety Valve (Socket)
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
Related products
-
General & Physical Tests
Hot Air Bath (Underground, Above Ground all Size Possible)
• The gap between the walls is filled up with special grade glass wool for proper
insulation to avoid heat losses.
• Temperature Control, Thermostat (Temperature accuracy +/- 3 Deg C)
• On/Off Control (Temperature accuracy +/- 2 Deg C)
• PID Control (Temperature accuracy +/- 1 Deg C)
• Microprocessor control (Temperature accuracy +/- 0.5 Deg C
• Please specify the kind of controller and accuracy required at the time of
ordering.
• Water Circulation
• Water circulation using separate motor or stirrer.
• Elements
• Heating elements are made of high quality heaters which are put inside the
water bath and placed at the bottom of the bathSKU: n/a -
General & Physical Tests
Multi Cell Ageing Oven (IEC & UL2556 Compliant)
Multicell Ageing Ovens (with or Without HMI-PLC control)
Each Cell is a complete instrument in itself i.e., fitted with individual Temp. Indicating Controller, Air Flow Meter, Air temperature controller and an
Hour Meter. This enables the user to test different type of samples at desired temperature and duration, depending upon test requirement of end users
& testing authorities.
The instrument consists of the following:
• Double walled chamber with inside chamber of thick aluminum sheet. Size of the chamber is 10 cm x 30 cm
• Digital Temp. Indicating Controller with sensor. Temp. range 0-200 ± 2 o C
• Digital Flow meter for monitoring the volume of air passing through the chamber.
• Air inlet nozzle for the airline or air compressor.
• Specially Designed heaters to heat the air before it enters the cell
• Separate temperature controllers for air temperature control
• Air turbulence fan with motor to rotate at 60 RPM (Air source has to be provided by User)
• Specially designed cover to hold three to five test samples in each chamber.
• Timer System to record the total time of test.SKU: n/a -
Automated Testing, General & Physical Tests, Machinery
UV weathering test chamber as per ISO 4892 – XENON ARC
Automated Testing, General & Physical Tests, MachineryUV weathering test chamber as per ISO 4892 – XENON ARC
UV weathering test chamber as per ISO 4892-XENON ARC TEST EQUIPMENT generally compliant with HD 626-2 or ISO 4892-2
The test equipment consists of
- 1-piece water-cooled xenon lamp with inner quartz and outer borosilicate filter
- Programmable color display touch screen controller to control and display test parameters
- Measurement and control of irradiance value at both 340nm, and 300~400nm
- Measurement and control of Black Panel Temperature (BPT)
- Measurement and control of chamber temperature and chamber humidity
- A water spray system with a built-in 50L water reservoir
- An automatic water supply system
- Industrial control panel with ferrule numbering & professional wiring for easy maintenance and troubleshooting
- RS-232 interface, able to connect and programs with Industrial PC/Desktop PC/Laptop
please also check our Fluoroscent Lamp UV weathering test equipment for cost-effective version.
Xenon Arc Test or UV Weathering Test as per ISO 4892-2 & 3
SKU: n/a -
Automated Testing, General & Physical Tests, Machinery
Optical Profile Projector for cable
We have all range of Profile projectors suitable for cable and automotive manufacturing sector. Market is flooded with inaccurate and camera based profile projectors that are actually not compliant with Vision systems but still expansive as them.
Automatic profile projector for cable used in Cable Dimension measurement of any shape of the cable. Available with Accredited calibration master, color measurement, from 36 mm to 108 mm diameter samples.IEC-60502-1 and EN 50525 describes the requirement of exact dimension measurement of the insulation, inner jacket and outer jacket of a cable and it’s core.
Where you actually lose money?
- Having higher Insulation wall thickness due to the operator’s running safety margin
- Ovality of extrusion head setting causes the inhomogeneous spread of compound over the conductor.
- Due to higher core diameter, each next process of cable manufacturing such as stranding, taping, braiding, armoring, shielding, inner sheathing, outer jacketing takes a minimum of 0.05% to 3% of extra material.
- An average-sized Cable manufacturer who consumes 10 Million euros of plastics per year losses around 300.000 € just because of non-optimized dimension of cables.
We also supply all the measuring components calibrated by NABL accredited master instruments so that accuracy and uncertainty are never a concern for our clients.
SKU: n/a
