Field Strength Meter for Antenna Allignment
<p class="stock in-stock"></p>
Three-Axis RF Field Strength Meter is meant for measuring and monitoring Radio-Frequency electromagnetic field intensity. The meter is calibrated precisely over the frequency range of 50MHz ~ 3.5GHz.
Three-Axis RF Field Strength Meter KM 195 is used to indicate electromagnetic pollution generated artificially, & wherever a voltage or a current, electric (E) and magnetic (H) fields arise. This electromagnetic pollution affects our health even if our sense organs perceive nothing. This meter is used for measuring and monitoring electromagnetic field strength.
Field Strength Meter KM 195 Service Details:
Sensor type: Electrical deled (E)
Frequency Range:50 MHz to 3.5M
Measurement method: Digital Trixie Measurement
Model Number:-D75
APPLICATIONS:
Quite often routine: maintenance and service work has
Electromagnetic radiation, such
Additionally, other employees may be exposed CW Signal: 0.01V/m to20.0 to
Power density measurement
Are present, e.g. in broadcasting stations, etc.
That personnel be not exposed to dangerous levels of High frequency (RF) electromagnetic wave field
Strength measurement
Electromagnetic radiation in such cases, it is essential
Mobile phone base station antenna radiation
Wireless communication applications
RF power measurement for transmitter
Wireless LAN (Wi-Fi) detection, installation
Cellular/ Cordless phone radiation safety
Level Microwave oven leakage detection
Spy camera, wireless bug finder
Personal living environment EMF safety
FEATURES:
High dynamic range due to three-channel
Frequency radiation in the range
The non-directional electric field antenna and high
The meter is a broadband device
Strength in TEM cells and absorber rooms
Configurable alarm threshold and memory function.
Digital results processing
Sensitivity also allow measurements of electric field
GENERAL SPECIFICATIONS:
Display: 47 digit 19999 counts liquid-crystal LCD display
Display resolution: 0.1mV/m, 0.1pA/m, 0.001uW/m®, 0.001uW/cm’
Measurement method: Digital triaxial measurement
Directional characteristic: Isotropic, triaxial
Audible alarm: Buzzer.
Units: mV/m, Vim, PA/m, mA/m, own/m2, mew/m2, PW/cm2
Display value: instantaneous measured value, maximum value average value maximum average value
You can also check out our Reaction to Fire Testing Products.
Related products
-
Electrical & Electronic
IEC 60695 Horizontal and Vertical Flammability Testing Equipment For Plastics
Electrical & ElectronicIEC 60695 Horizontal and Vertical Flammability Testing Equipment For Plastics
Horizontal and Vertical Flammability Testing Equipment For Plastics is suitable for testing the resistance of plastics and their plastic parts to spread combustion under the condition of flame combustion. It is in line with standard requirements of GB/T2408, GB13488, ISO1210 and UL94.
SKU: n/a -
Electrical & Electronic
ISO 5659 Plastic Smoke Density Measuring Instrument
Plastic Smoke Density Measuring Instrument Smoke Density Tester is suitable for measuring the specific optical density of the smoke produced during the combustion of plastics. It is in line with standard GB/T8323.2-2008 “Plastic Smoke Generation-Part 2: Test Method for Measuring Smoke Density by Single Chamber Method”.
SKU: n/a -
Electrical & Electronic
Continuity Voltage Tester
In Cable manufacturing at the final stage of testing, Continuity test is a standard practice and should be carried on each conductor. It is better to conduct Continuity test before HV test so that further damage of cable can be avoided in case the continuity is not shown by the conductor cores.
SKU: n/a
