Shop
Showing 289–312 of 414 results
-
-
-
Electrical & Electronic
Minimum Volume Fraction of Oxygen Index Tester – Tech Trivial
Minimum Volume Fraction of Oxygen Index Tester used to measure the volume percentage of oxygen needed in the process of polymer combustion. It’s design and development is in line with standard GB / T2406.2.
SKU: n/a -
Electrical & Electronic
Mining Cable Bending Test Machine
Mining Cable Bending Test Machine is suitable for testing the bending performance of mine cables, which is in line with the 6.1 standard requirement of MT818.1-2009. In this test When the cable is bent to a specified number, the conductor will pass through the test if the conductor is not broken or short circuited.
SKU: n/a -
General & Physical Tests
Multi Cell Ageing Oven (IEC & UL2556 Compliant)
Multicell Ageing Ovens (with or Without HMI-PLC control)
Each Cell is a complete instrument in itself i.e., fitted with individual Temp. Indicating Controller, Air Flow Meter, Air temperature controller and an
Hour Meter. This enables the user to test different type of samples at desired temperature and duration, depending upon test requirement of end users
& testing authorities.
The instrument consists of the following:
• Double walled chamber with inside chamber of thick aluminum sheet. Size of the chamber is 10 cm x 30 cm
• Digital Temp. Indicating Controller with sensor. Temp. range 0-200 ± 2 o C
• Digital Flow meter for monitoring the volume of air passing through the chamber.
• Air inlet nozzle for the airline or air compressor.
• Specially Designed heaters to heat the air before it enters the cell
• Separate temperature controllers for air temperature control
• Air turbulence fan with motor to rotate at 60 RPM (Air source has to be provided by User)
• Specially designed cover to hold three to five test samples in each chamber.
• Timer System to record the total time of test.SKU: n/a -
General & Physical Tests, Machinery, Tools & Cable Components
Multi Die – Hydraulic Press Machine for Making Sample Molds
General & Physical Tests, Machinery, Tools & Cable ComponentsMulti Die – Hydraulic Press Machine for Making Sample Molds
A hydraulic press is a multi-use device as it can be used to mold the plastic samples for several testing requirements as well as day to day inspection such as Color matching tabs can be made with it, Limiting oxygen index test samples as per ISO 4589 can be prepared. The use of it is quite simple, but the granules on the dies of expected shape and press it on prescribed temperature, and within some minutes you get your sample as required.
SKU: n/a -
-
-
Electrical & Electronic
Multifunctional LCR Meter with USB
Multifunctional LCR Meter has smart check and measurement of 19,999 / 1,999 counts dual LCD display. Battery and external power supply can be used as power source. It’s quality tested on predefined parameters and manufactured using high grade raw material and contemporary technology.
SKU: n/a -
General & Physical Tests
Natural Gas Safety Valve (Socket)
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
SKU: n/a -
Electrical & Electronic
NES 713 Automatic Naval Smoke Toxicity Index Test
Automatic Naval Smoke Toxicity Index Test Apparatus is designed and manufactured according to the NES standard of British Navy Engineering for the gas toxicity index produced by the burning of cable materials. It is in line According to JB/T10707 and NES713.
SKU: n/a -
Electrical & Electronic
NES 713 Automatic Smoke Toxicity Index Tester
Automatic Smoke Toxicity Index Tester is designed and manufactured according to the NES standard of British Navy Engineering for the gas toxicity index produced by the burning of cable materials. It meets compliance JB/T10707 and NES713.
SKU: n/a -
Electrical & Electronic
Neutral Salt Spray Corrosion Test Chamber
Salt Spray Corrosion Test Chamber is used to check corrosion resistance of metal plating, hardware, electronic components, chemical coatings, baking paint, automobiles, motorcycles, hardware sanitary ware, screws, springs, magnetic materials, organic and inorganic skin film etc. It is in line with ASTM B117.
SKU: n/a -
Electrical & Electronic
NFP92 Epiradiator Thermal Radiation Flame Propagation Tester
Epiradiator Thermal Radiation Flame Propagation Tester collects relevant data for evaluating the flame retardant properties of the material. The principle of the test is to perform 30KW/m2 heat radiation on the sample, which may cause the sample to evaporate and flammability. Its design and manufacture meet the requirements of NFP92-501, TB/T2639.1(Radiation Test Method for Fire Resistance Performance of Railway Vehicle Materials)
SKU: n/a -
Electrical & Electronic
NFPA92 | Thermal Radiation Flame Testing Equipment
Thermal Radiation Flame Spread Testing Machine / Flammability Tester is suitable for the determination of single or synthetic hard materials of any thickness. It meets the requirements of NFP92-501, TB/T2639.1 “Radiation Test Method for Fire Resistance Performance of Railway Vehicle Materials”
SKU: n/a -
Automated Testing, General & Physical Tests, Machinery
Optical Profile Projector for cable
We have all range of Profile projectors suitable for cable and automotive manufacturing sector. Market is flooded with inaccurate and camera based profile projectors that are actually not compliant with Vision systems but still expansive as them.
Automatic profile projector for cable used in Cable Dimension measurement of any shape of the cable. Available with Accredited calibration master, color measurement, from 36 mm to 108 mm diameter samples.IEC-60502-1 and EN 50525 describes the requirement of exact dimension measurement of the insulation, inner jacket and outer jacket of a cable and it’s core.
Where you actually lose money?
- Having higher Insulation wall thickness due to the operator’s running safety margin
- Ovality of extrusion head setting causes the inhomogeneous spread of compound over the conductor.
- Due to higher core diameter, each next process of cable manufacturing such as stranding, taping, braiding, armoring, shielding, inner sheathing, outer jacketing takes a minimum of 0.05% to 3% of extra material.
- An average-sized Cable manufacturer who consumes 10 Million euros of plastics per year losses around 300.000 € just because of non-optimized dimension of cables.
We also supply all the measuring components calibrated by NABL accredited master instruments so that accuracy and uncertainty are never a concern for our clients.
SKU: n/a
