Shop
Showing 193–216 of 414 results
-
Electrical & Electronic
Gasoline Fuel Line Tubing Fire Resistance Tester
Gasoline Fuel Line Tubing Fire Resistance Tester is used to test the fire resistance of the automobile pipe surface and the durability of the fuel pipe combustion. It complies with British MG Rover Roosevelt Group Engineering Standard 30MS401 and SAE J2027.
SKU: n/a -
Electrical & Electronic
Glow Wire Tester Testing Equipment
Glow Wire Tester Testing Equipment is used for insulating materials or other solid combustible materials that are prone to flame spread inside the equipment may be ignited by a hot wire or a burning element. It is in accordance with GB/T5169.10, IEC60695, UL746A.
SKU: n/a -
-
Reaction to Fire Testing
Halogen Gas Emission Test Apparatus as per IEC-60754
- The instrument comprising of
- Tubular Furnace for temp. up to 1000 o C +- 10 o C.
- PID Digital Temp. Indicating Controller.
- Digital Flow Indicator to monitor Air Flow with regulator
- Quartz tube and Quartz boat for keeping samples – one each.
- Gas Washing Bottles – 2 nos. Magnetic stirrer.
- Set of entire Glass (laboratory grade) wares.
- Ph Indicator & Conductivity Indicator ( for zero Halogen) (optional)
SKU: n/a -
Electrical & Electronic
Heat Distortion Test
Heat Distortion Test is a standard test used to assess the temperature at which a polymer, plastic or plastic composite specimen deforms under a given flexural load. Either it is based on Flow Meter Measurement, here equipment is fitted with rotameter. We can also use air velocity method.
SKU: n/a -
Electrical & Electronic
Hi-Pot Testing Equipment / Hi-Pot Tester
Hi-Pot Testing Equipment / Hi-Pot Tester uses digital circuit technology, which can automatically control the occurrence and stop of output voltage. It is in line with regulations of GB4706.1 – 1998 and IEC international safety standards.
SKU: n/a -
-
Electrical & Electronic
High Resolution UVA 315-400nm UV Accelerated Weathering Test Chamber
High Resolution UVA 315-400nm UV Weathering Aging Test Apparatus uses fluorescent ultraviolet lamp to simulate the effect of sunlight, and uses condensation moisture to simulate dew. The material under test is placed in a cyclic program of alternating light and moisture at a certain temperature. It is in line with ASTM G 153, ASTM G 154, ASTM D 4329 etc and all current UV aging test standards.
SKU: n/a -
Electrical & Electronic
High Voltage Tracking Test Equipment for Evaluating Resistance to Tracking and Erosion
Electrical & ElectronicHigh Voltage Tracking Test Equipment for Evaluating Resistance to Tracking and Erosion
High Voltage Tracking Test Equipment is used for evaluating resistance to tracking and erosion of electrical and electronic products. It’s design and manufacturing is in line with GB/T6553-2003 and IEC60587-1984 standards.
SKU: n/a -
Electrical & Electronic
High-speed Rail or Metro Wind Tunnel Testing Equipment
High-speed Rail or Metro Wind Tunnel Testing Equipment is a kind of suction DC heat transfer wind tunnel for simulating automobile, train, motor train, high-speed rail and tunnel wind tunnel testing. It is in line with ASCE/SEI 49-12 standard.
SKU: n/a -
General & Physical Tests
Horizontal Cold Chamber up to -86 deg
Techtrivial designs and develop many ranges of cold chambers for cable and plastic compounding industry. Our range goes from -23 Degree Celsius to -86 degree Celsius where you can test not only servo cables with -15 degree Celsius operating temperature but also Arctic grade cables up to -86 degree Celsius.
SKU: n/a -
General & Physical Tests
Hot Air Bath (Underground, Above Ground all Size Possible)
• The gap between the walls is filled up with special grade glass wool for proper
insulation to avoid heat losses.
• Temperature Control, Thermostat (Temperature accuracy +/- 3 Deg C)
• On/Off Control (Temperature accuracy +/- 2 Deg C)
• PID Control (Temperature accuracy +/- 1 Deg C)
• Microprocessor control (Temperature accuracy +/- 0.5 Deg C
• Please specify the kind of controller and accuracy required at the time of
ordering.
• Water Circulation
• Water circulation using separate motor or stirrer.
• Elements
• Heating elements are made of high quality heaters which are put inside the
water bath and placed at the bottom of the bathSKU: n/a -
General & Physical Tests
Hot Air Oven (With or without Air change)
Our Ovens are sturdy, with double walled construction. Inner chamber made of
ALUMINIUM or STAINLESS-STEEL sheet. Outer chamber is made of stainless steel
or galvanized steel or mild steel sheet and are duly powder coated.
The gap between the walls is filled up with special grade glass wool for proper
insulation to avoid heat losses. Inner chamber has ribs for placing the shelves at
convenient levels. Supplied with 2 or 3 removable shelves. The oven door is mounted
on heavy hinges with a handle. Door is duly insulated .
Temp control uses Thermostat ,On/Off Control ,PID Control ,Microprocessor control
*Please specify the kind of controller and accuracy required at the time of ordering.SKU: n/a -
General & Physical Tests
Hot Pressure Deformation Test Tool as per IEC 60811-508
Hot deformation test is also called a hot pressure test is an acceptance test in order to assess high-temperature resistance of the material to deformation. Thermoplastics tend to deform under high temperatures and small damage during movement or under installation to cable, can cause a puncture or cut of insulation. This could result in the circuit break down shutting down the entire system.
According to the famous test institute of Germany, it was said that the most failing test for HO5-HO7V K cables is this test. In order to achieve a high speed of extrusion, manufacturers tend to inadvertently ignore the impact of compound degradation.SKU: n/a -
-
